UNITED STATES 

SECURITIES AND EXCHANGE COMMISSION 

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 2017

or

For the transition period from ______ to ______.

Commission File Number: 001-34822

MRI INTERVENTIONS, INC.

(Exact name of registrant as specified in its charter)

(949) 900-6833 

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Act: Common Stock, $0.01 par value per share

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

☐ Yes ☒  No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.

☐ Yes ☒  No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☒  Yes ☐ No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). ☒  Yes ☐ No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). ☐ Yes ☒  No

As of June 30, 2017, the aggregate market value of the registrant’s common stock held by non-affiliates of the registrant was $37,780,637, based on the closing sale price as reported on the OTCQB Marketplace.

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date:

DOCUMENTS INCORPORATED BY REFERENCE

The information required by Part III is incorporated by reference from portions of the definitive proxy statement to be filed within 120 days after December 31, 2017, pursuant to Regulation 14A under the Securities Exchange Act of 1934 in connection with the 2017 annual meeting of stockholders. 

MRI INTERVENTIONS, INC. 

TABLE OF CONTENTS

Trademarks, Trade Names and Service Marks

ClearConnect^™, ClearPoint^®, ClearTrace^®, MRI Interventions^®, SmartFlow^®, SmartFrame^® and SmartGrid^® are trademarks of MRI Interventions, Inc. Any other trademarks, trade names or service marks referred to in this Annual Report are the property of their respective owners. As used in this Annual Report, Siemens refers to Siemens AG, Healthcare Sector, and its affiliates, Boston Scientific refers to Boston Scientific Corporation and its affiliates, Brainlab refers to Brainlab AG and its affiliates, and Voyager refers to Voyager Therapeutics, Inc. and its affiliates. 

PART I

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K, or Annual Report, contains “forward-looking statements” as defined under the United States federal securities laws. These statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performances or achievements, expressed or implied by the forward-looking statements. Forward-looking statements may include, but are not limited to, statements about:

In some cases, you can identify forward-looking statements by terms such as “anticipates,” “believes,” “could,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts,” “projects,” “should,” “will,” “would,” and similar expressions intended to identify forward-looking statements, although not all forward-looking statements contain these words. Although we believe that we have a reasonable basis for each forward-looking statement contained in this Annual Report, we caution you that these statements are based on a combination of facts and factors currently known by us and our projections of the future, about which we cannot be certain.

You should refer to the section of this Annual Report entitled “Risk Factors” for a discussion of important factors that may cause our actual results to differ materially from those expressed or implied by our forward-looking statements. As a result of these factors, we cannot assure you that the forward-looking statements in this Annual Report will prove to be accurate. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. In light of the significant uncertainties in these forward-looking statements, you should not regard these statements as a representation or warranty by us or any other person that we will achieve our objectives and plans in any specified time frame, or at all. We do not undertake to update any of the forward-looking statements after the date of this Annual Report, except to the extent required by applicable securities laws.

ITEM 1. BUSINESS

Overview

We are a medical device company that develops and commercializes innovative platforms for performing minimally invasive surgical procedures in the brain and heart under direct, intra-procedural magnetic resonance imaging, or MRI, guidance. From our inception in 1998 to 2002, we deployed significant resources to fund our efforts to develop the foundational capabilities for enabling MRI-guided interventions and to build an intellectual property portfolio. In 2003, our focus shifted to identifying and building out commercial applications for the technologies we developed in prior years.

We have two product platforms. Our ClearPoint system, which is in commercial use in the United States, is used to perform minimally invasive surgical procedures in the brain. We anticipate that our ClearTrace system, which is a product candidate still in development, will be used to perform minimally invasive surgical procedures in the heart. However, further development of ClearTrace has been suspended, as we devote our resources to the continued development and commercialization of ClearPoint. Both systems utilize intra-procedural MRI to guide the procedures.

Our products are designed to provide a new, minimally invasive surgical approach to address large patient populations for whom we believe current surgical techniques are deficient. Our ClearPoint system is a neuro-navigation system designed for placing catheters, electrodes and laser fibers to treat a variety of neurological diseases and conditions and for performing biopsies. Our ClearTrace system is designed to deliver catheter-based therapies to treat certain cardiac diseases. We believe that our two product platforms, subject to appropriate regulatory clearance and approval, will provide better patient outcomes, enhance revenue potential for both physicians and hospitals, and reduce costs to the healthcare system, further discussed as follows:

Industry Background

Magnetic Resonance Imaging

MRI is a widely practiced imaging technique that uses spatially varying magnetic fields to produce images of the human anatomy. Hydrogen nuclei, present in molecules throughout the body, are slightly magnetic. When placed in large external magnetic fields, they can be induced to emit or resonate radio frequency signals. These radio frequency signals are used to construct images of human anatomy, including high resolution images of soft tissue.

MRI has important and advantageous properties that differentiate it from other imaging methods. MRI scans can provide images of any part of the body, in any plane of view, and offer more detailed information than other modalities, including fluoroscopy and computed tomography. Some of the unique advantages of MRI include:

There are approximately 12,000 MRI scanners installed throughout the United States. MRI scanners are available in a number of different configurations and field strengths, which refers to the strength of the magnet used to create the magnetic field. Magnetic field strength is measured in Tesla, or T. The most common field strength for MRI scanners is 1.5T. Higher field strength scanners such as 3T MRI scanners are gaining commercial market adoption, offering faster scanner speeds and even higher resolution images than 1.5T MRI scanners. There are approximately 4,800 1.5T scanners and 900 3.0T scanners located within hospitals in the U.S. which potentially can be utilized for surgical procedures.

Minimally Invasive Surgical Procedures

Over the past few decades, one of the most significant medical trends has been the development of minimally invasive surgical methods and techniques. As its name implies, a minimally invasive procedure is a less invasive approach than open surgery. Minimally invasive procedures typically involve use of laparoscopic devices, catheter-based devices or remote-control manipulation of instruments once inside the body. Minimally invasive procedures in the brain have typically been performed using a complex technique known as stereotactic neurosurgery, under which a physician merges pre-operative images and data with specialized surgical instruments to help guide the surgical procedure in the brain.

Our Current Products and Product Candidates

ClearPoint Neuro Intervention System

General

Our ClearPoint system is designed to allow minimally invasive procedures in the brain to be performed in a hospital’s existing MRI suite. It provides guidance for the placement and operation of instruments or devices during the planning and operation of neurological procedures performed within the MRI suite using MRI guidance. Our ClearPoint system is intended to be used as an integral part of procedures, such as biopsies and the insertion of catheters, electrodes and fiber lasers, which have traditionally been performed using stereotactic methodologies. It is intended to be used with both 1.5T and 3T MRI scanners. Our research efforts for our ClearPoint system began in 2003, and in June 2010, we received 510(k) clearance from the FDA to market our ClearPoint system in the United States for general neurological interventional procedures. In February 2011, we also obtained CE marking approval for our ClearPoint system. The CE mark is an international symbol of adherence to quality assurance standards and compliance with applicable European Union medical device directives, and it allows us to market the ClearPoint system in the European Union. Today, ClearPoint systems are in clinical use with MRI scanners from the three major manufacturers, Siemens, GE Healthcare and Philips Healthcare, as well as the two major interventional MR/OR platforms, which are manufactured by IMRIS and Brainlab.

The Need for Minimally Invasive Neurological Interventions

Market Overview

Millions of people suffer from neurological diseases including: movement disorders such as Parkinson’s disease, essential tremor and dystonia; psychiatric disorders such as major depression, obsessive compulsive disorder and Alzheimer’s disease; and brain tumors, such as glioblastoma multiforme. The first line of therapy for most of these conditions is systemic administration of drugs. For example, to treat the early stages of Parkinson’s disease, a patient is often prescribed a drug called levodopa. Drugs such as levodopa can be effective in the earlier stages of the disease; however, as the disease progresses, systemic drugs may become less effective, and potentially ineffective, in treating the patient. Given the shortcomings of systemic drugs like levodopa, the medical community has focused significant resources to find new non-systemic or “local” therapies to treat these patients.

The development activity in, and the use of, local therapies is growing. For example, drug companies and researchers have identified and are investigating various compounds that are delivered directly into the diseased area of the brain, such as directly into the center of a tumor in the brain. Similarly, the medical community has developed a technique commonly referred to as focal ablation, under which a special probe is inserted into a target area of the brain and a small area of diseased brain tissue is then destroyed by applying laser energy or radio frequency energy through the tip of the special probe. Physicians perform this procedure to treat disorders such as Parkinson’s disease, essential tremor and epilepsy. The medical community has also developed another local therapy known as deep brain stimulation, or DBS. DBS uses mild electrical pulses from an implanted device to stimulate a small target region in the brain. A DBS system looks and operates much like a cardiac pacemaker, except that instead of sending pulses to the heart, it delivers electrical stimulation through the electrodes placed at a precisely targeted area in the brain. The FDA has approved the use of DBS for the treatment of Parkinson’s disease and essential tremor. The FDA has also approved the use of DBS for the treatment of dystonia and obsessive-compulsive disorder pursuant to humanitarian device exemptions. DBS is also being investigated as a therapy for other neurological disorders, such as epilepsy, treatment-resistant major depression and Alzheimer’s disease. 

These local therapies, among others, involve insertion of a catheter, probe or electrode into a target region of the brain, typically performed as a minimally invasive procedure. However, performing these minimally invasive interventions in the brain presents special challenges, including a need to reach a small therapeutic target often located deep within the brain, which target is often an area as small as a few millimeters in diameter. To reach these targets, the physician must act with precision to avoid damaging adjacent areas that are responsible for important neurological functions, such as memory or speech, or penetrating blood vessels which can lead to a life-threatening hemorrhage. The medical community developed stereotactic neurosurgery to address these obstacles. But, despite years of development and clinical experience, conventional stereotactic procedures remain complicated and time-consuming for many neurological interventions and can be extremely difficult on the patient.

U.S. Market Opportunities

We believe there are over 55,000 potential neurosurgical procedures per year in the United States in which our ClearPoint system could be used as a navigational platform. The potential procedures include:

Challenges with Conventional Stereotactic Neurosurgical Procedures

Conventional stereotactic neurosurgical procedures are performed in a standard operating room. With this method, a large, metal stereotactic frame is typically fixed to the patient’s skull, using skull pins, to provide a fixed and common coordinate system. After the frame is attached to the patient’s skull, the patient is then imaged pre-operatively, often using MRI, in order to obtain images showing both the stereotactic frame axes and the anatomical structures of the patient’s brain. These pre-operative images are then loaded into a surgical planning workstation. Surgical planning software is used to identify the neurological target for the procedure, as well as to define a trajectory path from the skull, through the brain tissue, and to the target. The planned trajectory and target location are then calculated in relation to the frame axes and then used to guide the surgery.

Because conventional stereotaxy relies on pre-operative images, and not intra-procedural images, errors in the alignment of the pre-operative images with the patient’s brain anatomy can, and often do, occur as a consequence of brain shift, variation in patient hydration, registration errors or misalignment of the frame. As a result, the physician often must undertake additional steps to further refine the process of locating the patient’s neurological target. These steps include physiological “mapping” of the brain and require an additional procedural step called microelectrode recording, which is a tedious and time-consuming process during which small probes containing microelectrodes are inserted into the deep brain structures, usually multiple times. As these microelectrode recording probes are passed through brain tissue, they pick up electrical activity. The microelectrode recording system then converts the electrical activity into audible tones. In hearing these various audible tones, a trained neurologist or neurophysiologist can distinguish different regions of the brain. Based on these tones, locations are mapped against the pre-operative images and used to refine and adjust the neurological target as depicted on those pre-operative images. New coordinates are then calculated and a new trajectory is planned. To further confirm locations in the brain, various physiologic responses are induced or monitored with the microelectrodes. These physiological mapping steps require the patient to be awake during the surgery and off medications. Given the procedure’s complexity, it is not uncommon for the procedure to last six or more hours. 

Our ClearPoint System Solution

We believe the design of our ClearPoint system can significantly simplify how stereotactic neurological interventions are performed. Instead of relying on the indirect guidance of pre-operative imaging, our ClearPoint system is based on a direct approach, in which a physician is guided by high resolution MRI during the procedure, which is designed to be performed in a standard hospital-based MRI scanner instead of a traditional operating room.

Our ClearPoint system is an integrated system comprised of hardware components, disposable components and intuitive, menu-driven software.

ClearPoint Hardware. Our hardware components consist primarily of a head fixation frame, computer workstation and in-room monitor. The head fixation frame immobilizes the patient’s head during the procedure, and it is designed to optimize the placement of an imaging head coil in proximity to the patient’s head. Our ClearPoint system software is installed on a computer workstation networked with an MRI scanner, for which we use a commercially available laptop computer. The in-room monitor allows the physician to view the display of our ClearPoint system workstation from the scanner room while performing the procedure.

ClearPoint Disposables. The disposable components of our ClearPoint system consist primarily of our SmartFrame trajectory device, a hand controller and related accessories. Our SmartFrame device is an adjustable trajectory guide that attaches to the patient’s skull and holds the targeting cannula. The hand controller attaches to our SmartFrame device, and it is used by the physician to adjust the roll, pitch, and X and Y orientation of the targeting cannula while the patient is in the MRI scanner. The accessories include all other components necessary to facilitate the MRI-guided neurological procedure, such as our SmartGrid patch, which is an MRI-visible marking grid that enables rapid localization of the entry position into the brain, and our customized surgical draping, which creates a sterile field within the MRI scanner. For drug delivery procedures, our SmartFlow cannula, which is an MRI-compatible injection and aspiration cannula, serves as the vehicle for the delivery of the compound.

ClearPoint Software. Our ClearPoint system software guides the physician in surgical planning, device alignment, navigation to the target and procedure monitoring. The software receives standard images from the MRI scanner through a network connection. The software leads the physician through a series of predefined steps, including MR image acquisition, establishment of image orientation landmarks, target identification and selection, trajectory planning, entry point planning and marking, targeting cannula orientation and refinement, and confirmation that the desired anatomical target(s) have been reached. The software uses image segmentation algorithms to help locate and identify our SmartFrame device and its targeting cannula, as well as the anatomical structures of the brain. The software also performs geometric computations to provide the physician with information regarding the positioning of instruments inserted into the patient’s brain relative to the target anatomical structures. At the completion of the procedure, the software generates an automated report that includes the key metrics from the procedure.

The ClearPoint Procedure. A procedure utilizing our ClearPoint system is performed entirely within a standard hospital-based MRI suite. Once placed in the MRI scanner, the patient’s head is immobilized in our head fixation frame with the patient’s head accessible to the physician. The physician then places our MRI-visible SmartGrid patch onto the patient’s head where the physician expects to enter the skull. The patient is then moved to the center of the scanner and images are taken of the patient’s brain that include the target area and our SmartGrid patch. Once the imaging is complete, the images are transferred to our ClearPoint system workstation so that the physician can determine the specific target site within the brain and the optimal trajectory path for the placement of the interventional device. With the trajectory path established, our ClearPoint system software will identify the specific location on our SmartGrid patch that corresponds with where the planned trajectory intersects the skull. The physician will then mark the skull using our custom marking tool. At the site of the mark, the physician will create the burr hole, which is the small hole in the patient’s skull through which the interventional device can be inserted into the brain.

 Our SmartFrame device is then centered and attached over the burr hole. The target and planned trajectory is reconfirmed by the physician using our ClearPoint system workstation. Using the hand controller, the physician adjusts the trajectory of the MRI-visible SmartFrame device to align the instrument with the planned trajectory. During this process, the software estimates a number of turns and direction of turn on each of the hand controller’s color-coded thumbwheels to align the instrument to the planned trajectory.

Once our SmartFrame device has been aligned to the proper trajectory, the depth dimension is calculated by the software. Immediately before insertion and partway through insertion, images are taken to ensure that the probe is correctly tracking along the planned trajectory. The physician continues advancing the interventional device towards the target site until it “snaps” into place on the SmartFrame device indicating that the interventional device has reached the proper depth. At this time, images are taken at the target site to insure the interventional device is in the proper location relative to the desired target.

Regulatory Status

Our ClearPoint system has a general indication for use. Our 510(k) clearance from the FDA permits us to market and promote our ClearPoint system in the United States for use in general neurological procedures, which includes procedures such as biopsies, catheter insertions and electrode insertions. This is the same general indication for use that applies to other devices that have traditionally been used in the performance of stereotactic neurological procedures. Similar to other conventional stereotaxy-based systems, our ClearPoint system’s general neurological indication for use does not reference specific neurological procedures. In the European Union, our CE mark approval carries the same indication for use as our 510(k) clearance in the United States.

Our SmartFlow cannula has received 510(k) clearance and is indicated for use in the injection of Cytarabine, which is a chemotherapy drug, or for the removal of cerebrospinal fluid from the ventricles of the brain during an intracranial procedure. Delivery of other therapeutic agents using our SmartFlow cannula is investigational. The SmartFlow cannula is a disposable device intended for single patient use only and is not intended for implant.

The ClearTrace Cardiac Intervention System

Our second product platform, the ClearTrace system, is a product candidate designed to allow catheter-based minimally invasive procedures in the heart to be performed using continuous, intra-procedural MRI guidance. However, further development of ClearTrace has been suspended, as we devote our resources to the continued development and commercialization of ClearPoint.

General

Catheter-based cardiac interventions performed in a fluoroscopy suite, generally referred to as a Cath Lab or EP Lab, have been the standard of care for the treatment of many cardiac disorders, such as cardiovascular disease. Certain procedures, such as stent placement, are well suited for fluoroscopic imaging because they do not require continuous, detailed visualization of the cardiac tissue. However, other procedures are not well suited for fluoroscopy because of the clinical need for continuous, high resolution imaging of the cardiac anatomy along with the interventional instruments. We believe an example of such a procedure is cardiac ablation to treat cardiac arrhythmias. Another example is the precision delivery of stem cells directly into the wall of the heart, which represents a promising therapy being researched for the treatment of heart failure.

Unlike the Cath Lab or EP Lab, we believe the ClearTrace system, once we have completed its development, will provide a continuous, high resolution, four-dimensional imaging environment (the fourth dimension being time), which will include detailed visualization of cardiac tissue, along with the cardiac catheters used to deliver the therapy. We believe that this new imaging capability is required for the next generation of interventional cardiac therapies. In addition, we anticipate that the ClearTrace system will eliminate all radiation exposure for both the patient and physician from the X-ray utilized in current procedures. Under current catheter-based treatments utilizing fluoroscopy, radiation exposure can exceed 45 minutes and require intravenous contrast dye which, in large quantities, is toxic to the kidneys. We believe that the attributes of our ClearTrace system could position it to be the therapy of choice for cardiac ablation procedures to treat cardiac arrhythmias, and the ideal platform for delivering future biologic therapies to treat heart failure and other similar cardiac disorders.

We began preliminary research for an MRI-guided cardiac ablation procedure shortly following our inception in 1998. As a culmination of those research efforts, in May 2009, we entered into an exclusive development agreement with Siemens, under which we and Siemens performed initial work related to the development of hardware and software needed for MRI-guided, catheter-based ablation procedures to treat cardiac arrhythmias. Working closely with us, Siemens created a research version of the software platform specifically for use in MRI-guided cardiac ablation procedures with our catheters. In February 2014, we entered into a new exclusive development agreement with Siemens, which replaced our May 2009 agreement. The new development agreement contemplates that, with cooperation, assistance and technical support from Siemens, we would develop the commercial version of the research software platform created by Siemens under our original agreement, which software would serve as the software component of our ClearTrace system. In 2015, we suspended our development activities on the ClearTrace system so that we could focus our resources on the ClearPoint system, and we have not made any filings seeking regulatory clearance or approval for our ClearTrace system.

ClearTrace System Components

We believe our ClearTrace system could represent a new paradigm in performing cardiac interventions. Similar to our ClearPoint system, the ClearTrace system is designed as an integrated system of hardware components, disposable components and intuitive, menu-driven software.

ClearTrace Hardware. The hardware components will be centered around our ClearConnect system, which is an MRI-compatible hardware and cabling system to enable catheter-based procedures in an MRI scanner.

ClearTrace Disposables. The disposable components will include, among other items, an ablation catheter and mapping catheter. The ablation catheter will be used to perform MRI-guided delivery of ablative energy to create cardiac lesions. The mapping catheter will be used for MRI-guided collection of intracardiac electrocardiogram signals and will include analog/digital filtering to enable electrocardiogram collection during scanning. All catheters and components will be MRI-compatible and tightly integrated with the MRI scanner.

ClearTrace Software. The ClearTrace system will include software designed to assist the physician in: surgical planning; creating three dimensional volumes of cardiac chambers; navigating our ClearTrace catheters within the cardiac chambers; visualizing lesions; tracking prior lesion locations; evaluating ablated cardiac tissue; and monitoring for possible adverse events. The ClearTrace system software will be integrated with our disposable components.

Regulatory Status

We have suspended development of our ClearTrace system so that we could focus our resources on the ClearPoint system, and to date we have conducted only animal studies and other preclinical work with respect to the ClearTrace system. We have not made any filing with any regulatory authority seeking approval or clearance for the ClearTrace system. We expect the initial market for our ClearTrace system will be the European Union, and, therefore, we intend to seek CE marking approval for the ClearTrace system at the appropriate time. In the United States, we believe that most components of the ClearTrace system will be Class II medical devices and will fall under the FDA’s 510(k) regulatory process. However, we believe the ablation catheter component may be a Class III medical device and could require FDA approval of a PMA.

Licenses and Collaborative Relationships

In addition to our internally-developed technologies and devices, we have established and may continue to pursue licensing and other collaborative relationships with medical device companies and academic institutions to further the development and commercialization of our product platforms and our core technologies. Our current material relationships are discussed below.

Brainlab

In April 2011, we entered into a co-development and distribution agreement with Brainlab. Our agreement with Brainlab expired in April 2016; however, Brainlab continues to serve as a distributor on a purchase order basis.

As part of the closing of the restructuring of a note payable to Brainlab, we entered into a worldwide, non-exclusive, non-transferable license with Brainlab on April 4, 2016, which allows Brainlab to develop proprietary software to support our SmartFrame device, for use in neurosurgery. The License Agreement will not affect our ability to continue to independently develop, market and sell our own software for the SmartFrame device.

Siemens

We entered into a cooperation and development agreement with Siemens in May 2009, under which we and Siemens performed initial work related to the development of hardware and software needed for MRI-guided, catheter-based ablation procedures to treat cardiac arrhythmias. Pursuant to the terms of our agreement, we were generally responsible for developing catheters and other hardware, and Siemens was responsible for developing software, to our specifications. We were responsible for paying Siemens for its software development work, but, under the terms of the agreement, Siemens owned the software. Working closely with us, Siemens created a research version of the software platform specifically for use in MRI-guided cardiac ablation procedures with our catheters, but a commercial version was not developed.

In February 2014, we entered into a new development agreement with Siemens, which replaced our May 2009 agreement. The new development agreement contemplates that, with cooperation, assistance and technical support from Siemens, we would develop the commercial version of the research software platform created by Siemens under our original agreement, which software would serve as the software component of our ClearTrace system. Upon completion of development, subject to appropriate regulatory clearance or approval, we would then sell the software as our own product, and the software would serve as the software component of our ClearTrace system.

Under the development agreement, Siemens developed, at our cost, certain software features, or host features, for certain of Siemens’ MAGNETOM MRI systems. The host features will enable the connection of our software and catheters to those MAGNETOM systems. The host features, which are owned by Siemens, run within the MRI scanner system. The host features will then connect to our software, which will operate on a separate computer workstation, and enable the performance of MRI-guided cardiac ablation procedures. Siemens agreed to maintain technical compatibility of the host features with our software for the term of the development agreement.

The development agreement provides for certain commercial exclusivity, generally extending for a period of four years following the European product release date of the host features, which occurred in October 2014, in the field of MRI-guided catheter-based cardiac electrophysiology using catheters that are actively tracked by the MRI scanner. During that period and within that field, or the exclusivity field, Siemens agreed that it will not engage in certain actions and activities, the intention being that we will have the exclusive opportunity to commercialize MRI-guided catheter-based cardiac electrophysiology with active catheter tracking with Siemens MRI systems. Likewise, during that exclusivity period and within the exclusivity field, we agreed that we will not sell or otherwise provide to any third party actively tracked catheters for commercial use, within the meaning of the development agreement, that are intended to be used with a non-Siemens MRI system. However, the development agreement provides that, as a condition of continued exclusivity, we must release the software and catheters for our ClearTrace system in the United States or European Union by the end of June 2016. In 2015, we suspended our development activities on our ClearTrace system to enable us to focus our resources on our ClearPoint system, and we have not made any filings seeking regulatory clearance or approval for our ClearTrace system. As a result, we did not meet the June 2016 milestone, and Siemens elected to terminate the exclusivity provisions of the development agreement.

The development agreement also contains a cross-licensing arrangement between us and Siemens. Under that arrangement, each party granted the other party a non-exclusive license to use certain intellectual property rights owned by the granting party and realized in the research software platform developed under the May 2009 agreement. Under our license from Siemens, we may use the licensed intellectual property rights to develop, manufacture and sell software. Under its license from us, Siemens may also use the licensed intellectual property rights to develop, manufacture and sell software.

The term of the development agreement will expire in the third quarter of 2018.

Boston Scientific

In connection with our research and development efforts for the ClearPoint and ClearTrace systems, we developed technologies that we believe can improve the MRI-safety profile of implantable medical leads. Implantable medical leads are thin, insulated wires that are connected to implantable generators, such as a pacemaker or neurostimulator, and deliver electrical pulses or stimulation to a specific area of the body, such as the heart or the brain. In 2005 and 2008, we entered into agreements with Boston Scientific that contemplate the potential use of our MRI-safety technologies in Boston Scientific’s implantable leads.

In December 2005, we entered into a development agreement and license agreement with Boston Scientific in the neuromodulation field. The development agreement related to the design and development of MRI-compatible and MRI-safe implantable leads for neuromodulation applications, such as implantable DBS leads. Under the license agreement, we granted Boston Scientific an exclusive, worldwide license with respect to certain of our intellectual property in the neuromodulation field to make, use, import, lease and sell neuro-related leads, neuro-related lead extensions, and neuro-related lead-type devices, such as implantable pulse generators. Boston Scientific is responsible for patent prosecution of the intellectual property it licensed and the payment of costs associated with patent prosecution.

In March 2008, we entered into a development agreement and license agreement with Boston Scientific in the field of implantable medical leads for cardiac applications. The development agreement related to feasibility assessment, design and development of certain MRI-compatible, MRI-safe implantable cardiac rhythm management leads. Under the license agreement, we granted Boston Scientific an exclusive, worldwide license with respect to certain of our intellectual property in the field of implantable medical leads for cardiac applications to make, have made, use, promote, market, import, distribute, lease, sell, offer for sale and commercialize products in that particular field of use. Boston Scientific is responsible for patent prosecution of the intellectual property it licensed and the payment of costs associated with patent prosecution.

In March 2014, Boston Scientific purchased from us some, but not all, of the intellectual property we had licensed exclusively to Boston Scientific within the fields of neuromodulation and implantable medical leads for cardiac applications. In connection with that purchase transaction, we entered into amendments to our development and license agreements with Boston Scientific to eliminate the milestone-based payments and royalties provided under those agreements. Accordingly, we are no longer entitled to receive future milestone-based payments or royalties under our development and license agreements with Boston Scientific.

The Johns Hopkins University

We have entered into certain exclusive license agreements with The Johns Hopkins University, or Johns Hopkins. For additional information regarding these licenses, see “Business–Intellectual Property.”

Mayo Clinic

In April 2017, we entered into a joint development agreement with Mayo Clinic for the design and development of MRI-guided therapies for stroke. The initial focus of the collaboration is the development and commercialization of a novel, MRI-guided, minimally invasive neurosurgical aspiration system, utilizing our ClearPoint platform, for the treatment of conditions such as intra cerebral hemorrhage.

Acoustic MedSystems, Inc.

In April 2017, we entered into a license and collaboration agreement with Acoustic MedSystems, Inc. (“AMS”). The agreement calls for our collaboration with AMS on the development of real-time, MRI-guided ultrasonic ablation therapies, with an initial focus on the treatment of pancreatic cancer. As part of the agreement, we received an exclusive license to AMS’s technology in the field of pancreatic cancer.

 Sales and Marketing

Commercializing our ClearPoint system involves marketing primarily to:

There are approximately 4,800 neurosurgeons in the United States. Similar to many fields of medicine, some neurosurgeons elect to focus on a particular specialty within the neurological field. For example, some neurosurgeons focus their practice on spine surgeries, others more on open craniotomy surgeries and others more on minimally invasive approaches, such as functional neurosurgery. We believe our ClearPoint system may be most applicable to those functional neurosurgeons, as well as oncologic neurosurgeons, but we also market our ClearPoint system to other neurosurgeons. We believe that our ClearPoint system represents an attractive platform for a neurosurgery team within a hospital to perform various general neurological procedures.

Our business model for the ClearPoint system is focused on producing high margin revenue from sales of the disposable components. Given that focus on disposable product sales, we sell our reusable components at lower margins in order to secure installations of our system within hospitals. In addition, we may make the reusable ClearPoint components available to hospitals pursuant to our ClearPoint Placement Program, under which we install a system at the hospital but we retain title to the system. Under that program, we may make the reusable ClearPoint components available to a hospital for use during an agreed-upon period of time while the hospital evaluates and processes the purchase opportunity. In addition, under the ClearPoint Placement Program we may permit a hospital to pay for an installed system or its use over an agreed-upon period of time. Our disposable and reusable ClearPoint products are tightly integrated, which allows us to leverage each new installation of a system to generate recurring sales of our disposable products.

As of February 28, 2018, our sales, clinical support and marketing team consisted of 15 employees. We believe that our current sales, clinical support and marketing team is sufficient for our current needs; however, we expect the size of our team to vary with size of the ClearPoint installed base and the volume of procedures utilizing the ClearPoint system.

Given the stage of development of the ClearTrace system, we have not developed a sales and marketing plan to commercialize ClearTrace either inside or outside the United States.

Research and Development

Continued innovation through research and development is important to our future success. As of February 28, 2018, our research and development team consisted of 6 employees. We have assembled an experienced team with recognized expertise in both the development of medical devices and advanced MRI technologies, including interventional MRI microcoils and catheters. We believe that our current research and development team is sufficient for our current needs; however, we may increase the size of our team depending on the progress of our ongoing research and development efforts. Our principal research and development goals are to continue to enhance our ClearPoint system and, resources permitting, to complete development of our ClearTrace system.

Manufacturing and Assembly

Our ClearPoint system includes off-the-shelf components, custom-made components produced to our proprietary specifications by various third parties and components that we assemble in our Irvine, California facility. We use third parties to manufacture these components to utilize their individual expertise, minimize our capital investment and help control costs. We purchase most custom-made components of our ClearPoint system from a single source due to quality considerations, lower costs and constraints resulting from regulatory requirements; however, we believe alternative sources are available, if needed. Generally, we purchase our components through purchase orders and do not have long-term contracts with most of our suppliers.

Our Irvine, California facility is structured to complete component processing, final assembly, packaging and distribution activities for our ClearPoint system. The assembly process is performed in a controlled environment as required by applicable regulation for medical device assembly. Our operations are subject to extensive regulation by the FDA under its Quality System Regulation, or QSR, which requires that manufacturers have a quality management system for the design and production of medical devices. In addition, to the extent we conduct business outside the United States, we are subject to international regulatory requirements.

Our Irvine, California facility is FDA-registered, and we believe it is compliant with the FDA’s QSR. We are also certified to ISO standard 13485. We have instituted a quality management system, under which we have established policies and procedures that control and direct our operations with respect to design, procurement, manufacture, inspection, testing, installation, data analysis, training and marketing. We review and internally audit our compliance with these policies and procedures, which provides a means for continued evaluation and improvement. As required by our quality management system, we undertake an assessment and qualification process for each third-party manufacturer or supplier that we use. Typically, our third-party manufacturers and suppliers are certified to ISO standard 9001 and/or 13485. We also periodically perform audit procedures on our key third-party manufacturers and suppliers to monitor their activities for compliance with our quality management system. Our facility and the facilities of the third-party manufacturers and suppliers we use are subject to periodic inspections by regulatory authorities, including the FDA and other governmental agencies.

Customers

A small number of our hospital customers account for a substantial portion of our revenues from sales of ClearPoint disposable products. Our two largest customers account for a disproportionately large portion of our ClearPoint product revenues.

Intellectual Property

We believe that in order to maintain a competitive advantage in the marketplace, we must develop and maintain the proprietary aspects of our technologies. We rely on a combination of patent, trademark, trade secret, copyright and other intellectual property rights and measures to protect our intellectual property.

Our patent portfolio includes patents and patent applications that we own, whether wholly-owned or co-owned, or license from others. We seek patent protection in the United States and internationally for our products and technologies where and when we believe it is appropriate. United States patents are granted generally for a term of 20 years from the earliest effective priority date of the patent application. The actual protection afforded by a foreign patent, which can vary from country to country, depends on the type of patent, the scope of its claims and the availability of legal remedies in the country.

We also rely on other forms of intellectual property rights and measures, including trade secrets and nondisclosure agreements, to maintain and protect proprietary aspects of our products and technologies. We require our employees and consultants to execute confidentiality agreements in connection with their employment or consulting relationships with us. We also require our employees and consultants to disclose and assign to us all inventions conceived during the term of their employment or engagement which relate to our business.

Patents and Patent Applications

We have a significant patent portfolio in the field of MRI-guided interventions. As of February 28, 2018, we wholly-owned, co-owned or licensed a total of 79 United States patents and 27 United States patent applications, as well as various foreign patents and foreign patent applications corresponding with many of our United States patents and applications. Our owned, issued patents expire at various dates beginning in 2020. Some of our patents and patent applications are co-owned by Boston Scientific, and, with respect to those patents and patent applications, we have licensing and cross-licensing arrangements in place with Boston Scientific. As a result of those arrangements, we have exclusive rights to all fields outside neuromodulation and implantable medical leads for cardiac applications, and we have licensed the fields of neuromodulation and implantable medical leads for cardiac applications to Boston Scientific.

Certain License Arrangements

License Arrangements with The Johns Hopkins University

Our principal licensing arrangement is with Johns Hopkins. Shortly following our formation in 1998, we entered into a license agreement with Johns Hopkins pursuant to which we obtained an exclusive, worldwide license to a number of technologies owned by Johns Hopkins relating to devices, systems and methods for performing MRI-guided interventions, such as MRI-guided cardiac ablation procedures. The field of use for this exclusive license covers diagnostic or therapeutic methods, processes or devices using an intravascular, intralumen or intratissue miniature magnetic resonance coil detection probe. We are obligated to pay Johns Hopkins an annual maintenance fee, and we are also obligated to pay a royalty to Johns Hopkins based on the sale of products or provision of services covered by a licensed patent. To the extent we sublicense any licensed intellectual property to a third-party, we agreed to pay Johns Hopkins a percentage of revenue we receive as a result of the sublicense. This license agreement with Johns Hopkins will terminate upon the expiration of the last to expire of the licensed patents.

In December 2006, we entered into a second license agreement with Johns Hopkins under which we obtained an exclusive, worldwide license to certain MRI-safety technologies owned by Johns Hopkins. Under the agreement, we are obligated to pay a royalty to Johns Hopkins based on the sale of products or provision of services covered by a licensed patent, subject to a minimum annual payment. Likewise, to the extent we sublicense any intellectual property to a third party, we agreed to pay Johns Hopkins a percentage of revenue we receive as a result of the sublicense. This license agreement with Johns Hopkins will terminate upon the expiration of the last to expire of the licensed patents.

In June 2008, we also entered into an exclusive license agreement with Johns Hopkins with respect to certain catheter technology. Under the agreement, we are obligated to pay a royalty to Johns Hopkins based on the sale of products or provision of services incorporating the licensed technology. Likewise, to the extent we sublicense any licensed technology to a third party, we agreed to pay Johns Hopkins a percentage of revenue we receive as a result of the sublicense. The license agreement terminates upon the expiration of the last to expire of the licensed patents.

License Arrangements with Merge

In July 2007, we entered into a master services and licensing agreement with Merge Healthcare Canada Corp. (formerly known as Cedara Software Corp.), or Merge, for Merge to develop on our behalf, based on our detailed specifications, a customized software solution for our ClearPoint system. Merge was in the business of providing software development and engineering services on a contract basis to a number of companies. In developing our ClearPoint system software, Merge utilized certain of its own pre-existing software code, or Merge software. Under our agreement with Merge, we received a non-exclusive, worldwide license to the Merge software, in object code form, as an integrated component of our ClearPoint system software. In return, we agreed to pay Merge a license fee for each copy of our ClearPoint system software that we distribute. Except for the Merge software, the work performed by Merge was a “work made for hire” and we exclusively own our ClearPoint system software. Under the master services and licensing agreement, Merge also performed ongoing custom engineering, maintenance and support services with respect to our ClearPoint system software, for which we compensated Merge. 

At our request, in July 2013, the master services and licensing agreement was amended to enable us to internally handle development, maintenance and support of our ClearPoint system software going forward. As a result, we now perform the software services which we previously outsourced to Merge. Under the amendment, Merge granted us a non-exclusive, non-transferable, worldwide license to the source code for the Merge software to use in our further development and commercialization of our ClearPoint system software. In return, we agreed to pay Merge a one-time license fee. Merge may terminate the source code license only for cause. We will continue to pay Merge a license fee for each copy of our ClearPoint system software that we distribute, but only for licenses in excess of the licenses we already had purchased or otherwise acquired from Merge prior to the July 2013 amendment. We already have satisfied our minimum license purchase commitments from Merge under the master services and licensing agreement.

License Arrangements with Boston Scientific

In connection with our March 2014 sale of certain MRI-safety technologies to Boston Scientific, we entered into a license agreement with Boston Scientific. Under that license agreement, Boston Scientific granted us an exclusive, royalty-free, fully paid, irrevocable, worldwide license to the transferred intellectual property, with the right to sublicense, within fields of use other than neuromodulation and implantable medical leads for cardiac applications.

Competition

General

The medical device industry is highly competitive, subject to rapid technological change and significantly affected by new product introductions and market activities of other participants. Therefore, our currently marketed products are, and future products we commercialize will be, subject to competition.

ClearPoint System

Currently, we are not aware of any other company that offers a direct MRI-guided stereotactic system for neurological interventions, although two companies, Monteris Medical Inc. and Medtronic, PLC offer devices for laser ablation under direct MRI guidance. In addition, companies such as Brainlab, Medtronic, PLC, Elekta AB, FHC Inc., Integra Life Sciences, and Neurologica Corporation, a subsidiary of Samsung Electronics Co., offer devices and systems for use in conventional stereotactic neurological procedures, such as surgical navigation workstations, frame-based and frameless stereotactic systems, portable computer tomography scanners and computer-controlled guidance systems, and these devices and systems are competitive with our ClearPoint system. Additionally, we could also face competition from other medical device, biotechnology and pharmaceutical companies that have the technology, experience and capital resources to develop alternative therapy methods, including MRI-guided technologies. Many of our competitors have substantially greater financial, manufacturing, marketing and technical resources than we have.

ClearTrace System

At least one company, Imricor Medical Systems, Inc., has received CE mark for the Advantage-MR EP Recorder/Stimulator System and Vision-MR Ablation Catheter, which are in clinical trials in Europe. At least one other company, Philips Healthcare, has a research and development effort in this field. We are not aware of any potential competitive advantages or disadvantages relative to any such system under development; however, if any such company develops and achieves commercial success for a direct MRI-guided cardiac ablation system, the ClearTrace system could be rendered non-competitive.

We also will face competition from companies who are engaged in the development and marketing of conventional catheter-based cardiac ablation systems and devices. These products include mapping systems using contact mapping, single-point spatial mapping and non-contact, multi-site electrical mapping technologies and ablation systems using radio frequency, ultrasound, laser and cryoablation technologies. These products evolve rapidly, and their manufacturers are constantly attempting to make them easier to use or more efficacious in performing procedures. Today, the vast majority of minimally invasive catheter-based cardiac ablation procedures are performed with these products. Because these products are currently in use while the ClearTrace system remains under development, physician preferences will have to shift for the ClearTrace system to gain market acceptance. We believe that the primary factors which may drive physician preference will be relative success rates and ease of the procedure for physicians with respect to the ClearTrace system compared to the alternative technologies available. 

We are aware of two companies, Hansen Medical (a subsidiary of Auris Surgical Robotics) and Stereotaxis, Inc., which currently market, or have marketed, systems to remotely control catheters during interventional cardiac ablation and other procedures using either robotic or magnetic steering. The nature of these systems potentially could provide better control over the catheter compared to manual manipulation by the physician; however, these systems do not provide the physician with detailed intra-procedural visualization of the cardiac tissue. Also, other manufacturers are attempting to market devices that access the exterior of the heart wall through an endoscopic surgical technique called thoracoscopy to treat atrial fibrillation. Because this procedure was developed recently, the clinical advantages and disadvantages of this approach compared to a catheter-based approach inside the heart have not been established. Therefore, we are not aware of any competitive advantages or disadvantages of this procedure relative to the anticipated ClearTrace system procedure.

Additionally, we will face competition from large companies who are engaged in the development and marketing of products for other treatments of cardiac arrhythmias. Their products include drugs, implantable devices, such as implantable defibrillators and pacemakers, and the devices used in open-heart surgery.

Many of our potential competitors have an established presence in the field of cardiac electrophysiology, including cardiac ablation, such as Biosense Webster Inc., a division of Johnson & Johnson, Boston Scientific, Cardio Focus, Inc., Medtronic, PLC and St. Jude Medical. These potential competitors have substantially greater financial and other resources than we do, including larger research and development staffs and more experience and greater capabilities in conducting research and development activities, testing products in clinical trials, obtaining regulatory clearances or approvals, and manufacturing, marketing and distributing products.

Regulatory Requirements of the United States Food and Drug Administration

Our research, development and clinical programs, as well as our manufacturing and marketing operations, are subject to extensive regulation in the United States and other countries. Most notably, all of our products sold in the United States are subject to regulation as medical devices under the federal Food Drug and Cosmetic Act, or FDCA, as implemented and enforced by the FDA. The FDA governs the following activities that we perform or that are performed on our behalf, to ensure that the medical devices we manufacture, promote and distribute domestically or export internationally are safe and effective for their intended uses:

FDA Premarket Clearance and Approval Requirements

Unless an exemption applies, each medical device we wish to commercially distribute in the United States will require either premarket notification, or 510(k) clearance, or approval of a PMA from the FDA. The FDA classifies medical devices into one of three classes. Class I devices, considered to have the lowest risk, are those for which safety and effectiveness can be assured by adherence to the FDA’s general regulatory controls for medical devices, which include compliance with the applicable portions of the FDA’s QSR, facility registration and product listing, reporting of adverse medical events, and appropriate, truthful and non-misleading labeling, advertising, and promotional materials (General Controls). Class II devices are subject to the FDA’s General Controls, and any other special controls as deemed necessary by the FDA to ensure the safety and effectiveness of the device (Special Controls). Manufacturers of most Class II and some Class I devices are required to submit to the FDA a premarket notification under Section 510(k) of the FDCA requesting permission to commercially distribute the device. This process is generally known as 510(k) clearance. Devices deemed by the FDA to pose the greatest risks, such as life-sustaining, life-supporting or implantable devices, or devices that have a new intended use, or use advanced technology that is not substantially equivalent to that of a legally marketed device, are placed in Class III, requiring approval of a PMA.

510(k) Clearance Pathway

When a 510(k) clearance is required, we will be required to submit a 510(k) application demonstrating that our proposed device is substantially equivalent to a previously cleared 510(k) device or a device that was in commercial distribution before May 28, 1976 for which the FDA has not yet called for the submission of PMAs. By regulation, the FDA is required to clear or deny a 510(k) premarket notification within 90 days of submission of the application. As a practical matter, clearance may take longer. The FDA may require further information, including clinical data, to make a determination regarding substantial equivalence.

If the FDA issues an order declaring the device to be Not Substantially Equivalent, or NSE, the device is placed into a Class III or PMA category. At that time, a company can request a de novo classification of the product. A de novo classification generally applies where there is no predicate device and the FDA believes the device is sufficiently safe so that no PMA should be required. The request must be in writing and sent within 30 days from the receipt of the NSE determination. The request should include a description of the device, labeling for the device, reasons for the recommended classification and information to support the recommendation. The de novo classification process has a 60-day review period. If the FDA classifies the device into Class II, a company will then receive an approval order to market the device. This device type can then be used as a predicate device for future 510(k) submissions. However, if the FDA subsequently determines that the device will remain in the Class III category, the device cannot be marketed until we have obtained an approved PMA.

Any modification to a 510(k)-cleared device that would constitute a major change in its intended use, or any change that could significantly affect the safety or effectiveness of the device, requires a new 510(k) clearance and may even, in some circumstances, require a PMA, if the change raises complex or novel scientific issues or the product has a new intended use. The FDA requires every manufacturer to make the determination regarding the need for a new 510(k) submission in the first instance, but the FDA may review any manufacturer’s decision. If the FDA were to disagree with any of our determinations that changes to a device did not require a new 510(k) submission, it could require us to cease marketing and distribution and/or recall the modified device until 510(k) clearance or PMA approval is obtained. If the FDA requires us to seek 510(k) clearance or PMA approval for any modifications to a device, we may be required to cease marketing and/or recall the modified device, if already in distribution, until 510(k) clearance or PMA approval is obtained and we could be subject to significant regulatory fines or penalties.

The FDA is currently considering proposals to reform its 510(k) marketing clearance process, and such proposals could include increased requirements for clinical data and a longer review period. Specifically, in response to industry and healthcare provider concerns regarding the predictability, consistency and rigor of the 510(k) regulatory pathway, the FDA initiated an evaluation of the 510(k) program, and in July 2014, published a new guidance document governing the review process for the clearance of medical devices. Specifically, the FDA has adopted new practices related to the acceptance of 510(k) applications which could place a higher standard on data and evidence provided to the FDA and a reduced ability to definitionally (i.e. same intended use, same technological characteristics) consider other devices as potential predicates. The FDA intends these reform actions to improve the efficiency and transparency of the 510(k) clearance process, as well as bolster patient safety.

PMA Approval Pathway

A PMA must be submitted to the FDA if the device cannot be cleared through the 510(k) process, or is not otherwise exempt from the FDA’s premarket clearance and approval requirements. A PMA must generally be supported by extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing and labeling, to demonstrate to the FDA’s satisfaction the safety and effectiveness of the device for its intended use. During the review period, the FDA will typically request additional information or clarification of the information already provided. Also, an advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA as to the approvability of the device. The FDA may or may not accept the panel’s recommendation. In addition, the FDA will generally conduct a pre-approval inspection of our or our third-party manufacturers’ or suppliers’ manufacturing facility or facilities to ensure compliance with the QSR. Once a PMA is approved, the FDA may require that certain conditions of approval be met, such as conducting a post market clinical trial. 

New PMAs or PMA supplements are required for modifications that affect the safety or effectiveness of the device, including, for example, certain types of modifications to the device’s indication for use, manufacturing process, labeling and design. PMA supplements often require submission of the same type of information as a PMA, except that the supplement is limited to information needed to support any changes from the device covered by the original PMA and may not require as extensive clinical data or the convening of an advisory panel. Although we believe that most components of our ClearTrace system will fall under the FDA’s 510(k) regulatory process, we do believe the ablation catheter component will require the approval of a PMA. Likewise, we could seek to add new indications for use of our existing products that require the approval of a PMA, although we do not have any current plans to do so.

Clinical Trials

Clinical trials are generally required to support a PMA application and are sometimes required for 510(k) clearance. Such trials generally require an application for an investigational device exemption, or IDE, which is approved in advance by the FDA for a specified number of patients and study sites, unless the product is deemed a non-significant risk device eligible for more abbreviated IDE requirements. A significant risk device is one that presents a potential for serious risk to the health, safety, or welfare of a patient and either is implanted, used in supporting or sustaining human life, substantially important in diagnosing, curing, mitigating, or treating disease or otherwise preventing impairment of human health, or otherwise presents a potential for serious risk to a subject. Clinical trials are subject to extensive monitoring, recordkeeping and reporting requirements. Clinical trials must be conducted under the oversight of an institutional review board, or IRB, for the relevant clinical trial sites and must comply with FDA regulations, including, but not limited to, those relating to good clinical practices. To conduct a clinical trial, we also are required to obtain the patient’s informed consent in a form and substance that complies with both FDA requirements and state and federal privacy and human subject protection regulations. We, the FDA or the IRB could suspend a clinical trial at any time for various reasons, including a belief that the risks to study subjects

outweigh the anticipated benefits. Even if a trial is completed, the results of clinical testing may not adequately demonstrate the safety and efficacy of the device or may otherwise not be sufficient to obtain FDA clearance or approval to market the product in the United States. Similarly, in Europe, the clinical study must be approved by a local ethics committee and in some cases, including studies with high-risk devices, by the ministry of health in the applicable country.

Pervasive and Continuing Regulation

After a device is placed on the market, numerous regulatory requirements continue to apply. In addition to the requirements below, the Medical Device Reporting regulations require that we report to the FDA any incident in which our product may have caused or contributed to a death or serious injury or in which our product malfunctioned and, if the malfunction were to recur, would likely cause or contribute to death or serious injury. Additional regulatory requirements include:

As a medical device manufacturer, we are subject to announced and unannounced inspections by the FDA to determine our compliance with FDA’s QSR and other regulations. We believe that we are in compliance with QSR and other regulations.

Advertising and promotion of medical devices, in addition to being regulated by the FDA, are also regulated by the United States Federal Trade Commission, or FTC, and by state regulatory and enforcement authorities. Promotional activities for FDA-regulated products of other companies have been the subject of enforcement actions brought under healthcare reimbursement laws and consumer protection statutes. Furthermore, under the federal Lanham Act and similar state laws, competitors and others can initiate litigation relating to advertising claims. In addition, we are required to meet regulatory requirements in countries outside the United States, which can change rapidly with relatively short notice. If the FDA determines that our promotional materials or training constitutes promotion of an unapproved or uncleared use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an unapproved use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement.

Failure by us or by our third-party manufacturers and suppliers to comply with applicable regulatory requirements can result in enforcement action by the FDA or other regulatory authorities, which may result in sanctions including, but not limited to:

International Marketing Approvals

International sales of medical devices are subject to foreign government regulations, which vary substantially from country to country. The time required to obtain approval by a foreign country may be longer or shorter than that required for FDA clearance or approval, and the requirements may differ.

The European Union has adopted numerous directives and standards regulating the design, manufacture, clinical trials, labeling, and adverse event reporting for medical devices. Each European Union member state has implemented legislation applying these directives and standards at a national level. Other countries, such as Switzerland, have voluntarily adopted laws and regulations that mirror those of the European Union with respect to medical devices. Devices that comply with the requirements of the laws of the relevant member state applying the applicable European Union directive are entitled to bear a CE mark and, accordingly, can be distributed throughout the member states of the European Union as well as in other countries, such as Switzerland and Israel, that have mutual recognition agreements with the European Union or have adopted the European Union’s regulatory standards. 

The method of assessing conformity with applicable regulatory requirements varies depending on the classification of the medical device, which may be Class I, Class IIa, Class IIb or Class III. Normally, the method involves a combination of self-assessment by the manufacturer of the safety and performance of the device, and a third-party assessment by a Notified Body, usually of the design of the device and of the manufacturer’s quality system. A Notified Body is a private commercial entity that is designated by the national government of a member state as being competent to make independent judgments about whether a device complies with applicable regulatory requirements. An assessment by a Notified Body in one country with the European Union is required in order for a manufacturer to commercially distribute the device throughout the European Union. In addition, compliance with ISO 13485 issued by the International Organization for Standardization, among other standards, establishes the presumption of conformity with the essential requirements for CE marking. Certification to the ISO 13485 standard demonstrates the presence of a quality management system that can be used by a manufacturer for design and development, production, installation and servicing of medical devices and the design, development and provision of related services.

Healthcare Laws and Regulations

Third-Party Reimbursement

In the United States and elsewhere, healthcare providers that perform surgical procedures using medical devices such as ours generally rely on third-party payors, including governmental payors such as Medicare and Medicaid and private payors, to cover and reimburse all or part of the cost of the products. Consequently, sales of medical devices are dependent in part on the availability of reimbursement to the customer from third-party payors. The manner in which reimbursement is sought and obtained varies based upon the type of payor involved and the setting in which the product is furnished and utilized. In general, third-party payors will provide coverage and reimbursement for medically reasonable and necessary procedures and tests that utilize medical devices. Third-party payors may provide separate payments for implanted or disposable devices themselves, although no such separate payments are currently provided for our ClearPoint disposable products. Most third-party payors will not pay separately for capital equipment. Instead, payment for the cost of using the capital equipment is considered to be covered as part of payments received for performing the procedure. In determining payment rates, third-party payors are increasingly scrutinizing the prices charged for medical products and services in comparison to other therapies.

In many foreign markets, including the countries in the European Union, pricing of medical devices is subject to governmental control. In the United States, there have been, and we expect that there will continue to be, a number of federal and state proposals to limit payments by governmental payors for medical devices, and the procedures in which medical devices are used.

Medicare and Medicaid

The Medicare program is a federal health benefit program administered by the Centers for Medicare and Medicaid Services, or CMS, that covers and pays for certain medical care items and services for eligible elderly and certain disabled individuals, and individuals with end stage renal disease. The Medicaid program is a federal-state partnership under which states receive matching federal payments to fund healthcare services for the poor. Because some private commercial health insurers and some state Medicaid programs may follow the coverage and payment policies for Medicare, Medicare’s coverage and payment policies are significant to our business.

Medicare coverage for the procedures in which our ClearPoint products are used currently exists in the hospital inpatient setting, which falls under Part A of the Medicare program. Under Medicare Part A, Medicare reimburses acute care hospitals a prospectively determined payment amount for beneficiaries receiving covered inpatient services in an acute care hospital. This method of payment is known as the prospective payment system, or PPS. Under PPS, the prospective payment for a patient’s stay in an acute care hospital is determined by the patient’s condition and other patient data and procedures performed during the inpatient stay using a classification system known as Medicare Severity Diagnosis Related Groups, or MS-DRGs. Payments also are adjusted to reflect other factors, such as regional variations in labor costs and indirect medical education expenses. Medicare pays a fixed amount to the hospital based on the MS-DRG into which the patient’s stay is classified, regardless of the actual cost to the hospital of furnishing the procedures, items and services that the patient’s condition requires. Accordingly, acute care hospitals generally do not receive direct Medicare reimbursement under PPS for the specific costs incurred in purchasing medical devices. Rather, reimbursement for these costs is deemed to be included within the MS-DRG-based payments made to hospitals for the services furnished to Medicare-eligible inpatients in which the devices are utilized. For cases involving unusually high costs, a hospital may receive additional “outlier” payments above the pre-determined amount. In addition, there is a mechanism by which new technology services can apply to Medicare for additional payments above the pre-determined amount, although such requests have not been granted frequently. 

Because PPS payments are based on predetermined rates and may be less than a hospital’s actual costs in furnishing care, and due to payment reforms enacted relatively recently, acute care hospitals have incentives to lower their inpatient operating costs by utilizing products, devices and supplies that will reduce the length of inpatient stays, decrease labor or otherwise lower their costs. For each MS-DRG, a relative weight is calculated representing the average resources required to care for cases grouped in that particular MS-DRG relative to the average resources used to treat cases in all MS-DRGs. MS-DRG relative weights are recalculated every year to reflect changes in technology and medical practice in a budget neutral manner. Under the MS-DRG payment system, there can be significant delays in obtaining adequate reimbursement amounts for hospitals for new technologies such that reimbursement may be insufficient to permit broad acceptance by hospitals.

In addition to payments to hospitals for procedures using our technology, Medicare makes separate payments to physicians for their professional services. The American Medical Association, or AMA, has developed a coding system known as the Current Procedural Terminology, or CPT, codes, which has been adopted by the Medicare program to describe and develop payment amounts for certain physician services.

The Medicare physician fee schedule uses CPT codes (and other codes) as part of the determination of allowable payment amounts to physicians. In determining appropriate payment amounts for surgeons, CMS receives guidance from the AMA regarding the relative technical skill level, level of resources used, and complexity of a new surgical procedure. Generally, the designation of a new procedure code for a new procedure using a new product does not occur until after FDA clearance or approval of the product used in the procedure. Codes are assigned by either the AMA (for CPT codes) or CMS (for Medicare-specific codes), and new codes usually become effective on January 1st of each year.

One result of the current Medicare payment system, which is also utilized by most non-governmental third-party payors, is that a patient’s treating physician orders a particular service and the hospital (or other facility in which the procedure is performed) bears the cost of delivery of the service. Hospitals have limited ability to align their financial interests with that of the treating physician because Medicare law generally prohibits hospitals from paying physicians to assist in controlling the costs of hospital services, including paying physicians to limit or reduce services to Medicare beneficiaries even if such services are medically unnecessary. As a result, hospitals have traditionally stocked supplies and products requested by physicians and have had limited ability to restrict physicians’ choice of products and services.

The Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010, or, together, the Affordable Care Act, included a number of provisions that will likely result in more coordination between hospitals and physicians and alignment of financial incentives between hospitals and physicians to control hospital costs. Most significantly, the Affordable Care Act provided for a Medicare shared savings program whereby Medicare will share certain savings realized in the delivery of services to Medicare beneficiaries with accountable care organizations, which may be organized through various different legal structures between hospitals and physicians. Other payment reform provisions in the Affordable Care Act included pay-for-performance initiatives, payment bundling and the establishment of an independent payment advisory board.

Among other things, the Affordable Care Act will ultimately increase the overall pool of persons with access to health insurance in the United States, at least in those states that expand their Medicaid programs. Although such an increase in covered lives should ultimately benefit hospitals, the Affordable Care Act also includes a number of cuts in Medicare reimbursement to hospitals that may take effect prior to the time hospitals realize the financial benefit of a larger pool of insured persons. Such cuts in Medicare reimbursement could adversely impact the operations and finances of hospitals, reducing their ability to purchase medical devices such as our products. Further, Congress has yet to address in a comprehensive and permanent manner the pending reduction in Medicare payments to physicians under the sustainable growth rate formula, which, if not resolved, will likely result in an overall reduction of physicians willing to participate in Medicare. 

On April 16, 2015, President Obama signed into law, the Medicare Access and CHIP Reauthorization Act of 2015, or the Medicare Access Act, which removed the sustainable growth rate or SGR, methodology applicable to fees for physician services. The Medicare Access Act provides for a transition from the fee-for-service payment system to a more value-based system. In this process, reimbursements from the Medicare program may be reduced. As noted above, failure by hospitals and physicians to receive an amount that they consider to be adequate reimbursement for procedures in which our products are used will deter them from purchasing or using our products and will limit our sales growth.

Commercial Insurers

In addition to the Medicare program, many private payors look to CMS policies as a guideline in setting their coverage policies and payment amounts. The current coverage policies of these private payors may differ from the Medicare program, and the payment rates they make may be higher, lower, or the same as the Medicare program. If CMS or other agencies decrease or limit reimbursement payments for hospitals and physicians, this may affect coverage and reimbursement determinations by many private payors. Additionally, some private payors do not follow the Medicare guidelines, and those payors may reimburse only a portion of the costs associated with the use of our products, or none at all.

Fraud and Abuse Laws

Because of the significant federal funding involved in Medicare and Medicaid, Congress and the states have enacted, and actively enforce, a number of laws whose purpose is to eliminate fraud and abuse in federal healthcare programs. Our business is subject to compliance with these laws.

Anti-Kickback Laws

In the United States, there are federal and state anti-kickback laws that generally prohibit the payment or receipt of kickbacks, bribes or other remuneration in exchange for the referral of patients or other health-related business. The United States federal healthcare programs’ Anti-Kickback Statute makes it unlawful for individuals or entities knowingly and willfully to solicit, offer, receive or pay any kickback, bribe or other remuneration, directly or indirectly, in exchange for or to induce the purchase, lease or order, or arranging for or recommending purchasing, leasing, or ordering, any good, facility, service, or item for which payment may be made in whole or in part under a federal healthcare program such as Medicare or Medicaid. The Anti-Kickback Statute covers “any remuneration,” which has been broadly interpreted to include anything of value, including for example gifts, certain discounts, the furnishing of free supplies, equipment or services, credit arrangements, payments of cash and waivers of payments. Several courts have interpreted the statute’s intent requirement to mean that if any one purpose of an arrangement involving remuneration is to induce referrals of federal healthcare covered business, the arrangement can be found to violate the statute. Penalties for violations include criminal penalties and civil sanctions such as fines, imprisonment and possible exclusion from Medicare, Medicaid and other federal healthcare programs. In addition, several courts have permitted kickback cases brought under the federal False Claims Act to proceed, as discussed in more detail below.

Because the Anti-Kickback Statute is broadly written and encompasses many harmless or efficient arrangements, Congress authorized the Office of Inspector General of the United States Department of Health and Human Services, or OIG, to issue a series of regulations, known as “safe harbors.” For example, there are regulatory safe harbors for payments to bona fide employees, properly reported discounts, and payments for certain investment interests. Although an arrangement that fits into one or more of these exceptions or safe harbors is immune from prosecution, arrangements that do not fit squarely within an exception or safe harbor do not necessarily violate the statute. The failure of a transaction or arrangement to fit precisely within one or more of the exceptions or safe harbors does not necessarily mean that it is illegal or that prosecution will be pursued. However, conduct and business arrangements that arguably implicate the Anti-Kickback Statute but do not fully satisfy all the elements of an exception or safe harbor may be subject to increased scrutiny by government enforcement authorities such as the OIG. The Affordable Care Act increased the investigatory authority of the OIG, clarified that Anti-Kickback Statute claims can be brought under the federal civil False Claims Act, and provided for enhanced civil monetary penalties and expanded permissible exclusion authority. 

Many states have laws that implicate anti-kickback restrictions similar to the federal Anti-Kickback Statute. Some of these state prohibitions apply regardless of whether federal healthcare program business is involved, such as for self-pay or private pay patients.

Government officials have focused their enforcement efforts on marketing of healthcare services and products, among other activities, and recently have brought cases against companies, and certain sales, marketing and executive personnel, for allegedly offering unlawful inducements to potential or existing customers in an attempt to procure their business.

Federal Civil False Claims Act and State False Claims Laws

The federal civil False Claims Act imposes liability on any person or entity that, among other things, knowingly and willfully presents, or causes to be presented, a false or fraudulent claim for payment by a federal healthcare program, including Medicare and Medicaid. The “qui tam” or “whistleblower” provisions of the False Claims Act allow a private individual to bring actions on behalf of the federal government alleging that the defendant has submitted a false claim to the federal government and to share in any monetary recovery. In recent years, the number of suits brought against healthcare providers by private individuals has increased dramatically. Medical device companies, like us, can be held liable under false claims laws, even if they do not submit claims to the government where they are deemed to have caused submission of false claims by, among other things, providing incorrect coding or billing advice about their products to customers that file claims, or by engaging in kickback arrangements with customers that file claims.

The False Claims Act also has been used to assert liability on the basis of misrepresentations with respect to the services rendered and in connection with alleged off-label promotion of products. Our activities relating to the manner in which we sell our products and document our prices such as the reporting of discount and rebate information and other information affecting federal, state and third-party reimbursement of our products, and the sale and marketing of our products, may be subject to scrutiny under these laws.

The Affordable Care Act may increase the number of cases asserting civil False Claims Act violations since it removes a significant defense to such claims and clarifies that a violation of the Anti-Kickback Statute and the retention of a federal healthcare program overpayment are both actionable under the civil False Claims Act.

When an entity is determined to have violated the False Claims Act, it may be required to pay up to three times the actual damages sustained by the government, plus civil penalties for each separate false claim. There are many potential bases for liability under the False Claims Act. A number of states have enacted false claim laws analogous to the federal civil False Claims Act and many of these state laws apply where a claim is submitted to any state or private third-party payor.

HIPAA Fraud and Other Regulations

The Health Insurance Portability and Accountability Act of 1996, or HIPAA, created a class of federal crimes known as the “federal healthcare offenses,” including healthcare fraud and false statements relating to healthcare matters. The HIPAA healthcare fraud statute prohibits, among other things, knowingly and willfully executing, or attempting to execute, a scheme or artifice to defraud any healthcare benefit program, or to obtain by means of false of fraudulent pretenses, any money under the control of any healthcare benefit program, including private payors. A violation of this statute is a felony and may result in fines, imprisonment and/or exclusion from government-sponsored programs. The Affordable Care Act also provides for civil monetary penalties for knowingly participating in certain federal healthcare offenses and enhances sentences under the Federal Sentencing Guidelines for such offenses. The HIPAA false statements statute prohibits, among other things, knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement or representation in connection with the delivery of or payment for healthcare benefits, items or services. A violation of this statute is a felony and may result in fines and/or imprisonment. Entities that are found to have aided or abetted in a violation of the HIPAA federal healthcare offenses are deemed by statute to have committed the offense and are punishable as a principal. 

We are also subject to the United States Foreign Corrupt Practices Act and similar anti-bribery laws applicable in non-United States jurisdictions that generally prohibit companies and their intermediaries from making improper payments to non-United States government officials for the purpose of obtaining or retaining business. Because of the predominance of government sponsored healthcare systems around the world, we expect that many of customer relationships outside of the United States will be with governmental entities and therefore subject to such anti-bribery laws.

HIPAA and Other Privacy & Security Laws

As a part of HIPAA, Congress enacted the Administrative Simplification provisions, which are designed to require the establishment of uniform standards governing the conduct of certain electronic healthcare transactions and protecting the security and privacy of individually identifiable health information maintained or transmitted by healthcare providers, health plans and healthcare clearinghouses, which are referred to as “covered entities.” Several regulations have been promulgated under HIPAA, including: the Standards for Privacy of Individually Identifiable Health Information, or the Privacy Rule, which restricts the use and disclosure of certain individually identifiable health information; the Standards for Electronic Transactions, which establishes standards for common healthcare transactions, such as claims information, plan eligibility, payment information and the use of electronic signatures; and the Security Standards for the Protection of Electronic Protected Health Information, or the Security Rule, which requires covered entities to implement and maintain certain security measures to safeguard certain electronic health information. Although we do not believe we are a covered entity and therefore are not currently subject to these standards directly, we expect that our customers generally will be covered entities and may ask us to contractually comply with certain aspects of these standards by entering into confidentiality agreement or, when appropriated, business associate agreements. While the government intended this legislation to reduce administrative expenses and burdens for the healthcare industry, our compliance with certain provisions of these standards could entail significant costs for us.

The Health Information Technology for Economic and Clinical Health Act, or HITECH, which was enacted in February 2009, strengthened and expanded the HIPAA Privacy and Security Rules and the restrictions on use and disclosure of patient identifiable health information. HITECH also fundamentally changed a business associate’s obligations by imposing a number of Privacy Rule requirements and a majority of Security Rule provisions directly on business associates that were previously only directly applicable to covered entities. HITECH includes, but is not limited to, prohibitions on exchanging patient identifiable health information for remuneration (directly or indirectly), restrictions on marketing to individuals and obligations to agree to provide individuals an accounting of virtually all disclosures of their health information. Moreover, HITECH requires covered entities to report any unauthorized use or disclosure of patient identifiable health information that compromises the security or privacy of the information, known as a breach, to the affected individuals, the United States Department of Health and Human Services, or HHS, and depending on the size of any such breach, the media for the affected market. Business associates are similarly required to notify covered entities of a breach.

HITECH has increased civil penalty amounts for violations of HIPAA by either covered entities or business associates up to an annual maximum of $1.5 million for each uncorrected violation based on willful neglect. Imposition of these penalties is more likely now because HITECH significantly strengthens enforcement. It requires HHS to conduct periodic audits to confirm compliance and to investigate any violation that involves willful neglect. Additionally, state attorneys general are authorized to bring civil actions seeking either injunctions or damages in response to violations of HIPAA Privacy and Security Rules that threaten the privacy of state residents.

In addition to federal regulations issued under HIPAA, some states have enacted privacy and security statutes or regulations that, in some cases, are more stringent than those issued under HIPAA. Further, the majority of states have enacted state data breach laws, which also require notification of certain alleged breaches of the privacy or security of personal information. 

Federal and state consumer protection laws are being applied increasingly by the FTC and state attorneys general to regulate the collection, use, storage and disclosure of personal or patient information, through websites or otherwise, and to regulate the presentation of web site content. Courts may also adopt the standards for fair information practices promulgated by the FTC, which concern consumer notice, choice, security and access. Numerous other countries have or are developing laws governing the collection, use, disclosure and transmission of personal or patient information.

HIPAA, as well as other federal and state laws, will apply to our receipt of patient identifiable health information in connection with any clinical trials we conduct. In addition, we collaborate with other individuals and entities in conducting research and all involved parties must comply with applicable laws. Therefore, the compliance of the physicians, hospitals or other providers or entities with which we collaborate affects our company.

Employees

As of February 28, 2018, we had 34 full time employees, of whom 6 were engaged primarily in research and development, 9 in manufacturing and quality assurance, 15 in sales, clinical support and marketing, and 4 in administrative and finance functions. None of our employees are covered by a collective bargaining agreement, and we consider our relationship with our employees to be good.

ITEM 1A. RISK FACTORS

Any investment in our common stock involves a high degree of risk. You should consider carefully the risks and uncertainties described below and all information contained in this Annual Report before you decide whether to purchase our common stock. If any of the following risks or uncertainties actually occurs, our business, financial condition, results of operations and prospects would likely suffer, possibly materially. In addition, the trading price of our common stock could decline due to any of these risks or uncertainties, and you may lose part or all of your investment.

Risks Related to Our Business and Industry

Our ClearPoint system may not achieve broad market acceptance or be commercially successful.

We expect that sales of our ClearPoint system products will account for the majority of our revenues for at least the next few years. Our ClearPoint system may not gain broad market acceptance unless we continue to convince physicians, hospitals and patients of its benefits. Moreover, even if physicians and hospitals understand the benefits of our ClearPoint system, they still may elect not to use our ClearPoint system for a variety of reasons, such as:

If physicians and hospitals do not perceive our ClearPoint system as an attractive alternative to other products and procedures, we will not achieve significant market penetration or be able to generate significant revenues. To the extent that our ClearPoint system is not commercially successful or is withdrawn from the market for any reason, our revenues will be adversely impacted, and our business, operating results and financial condition will be harmed.

We have relatively limited experience marketing and selling our ClearPoint system, and if we are unable to expand, manage and maintain our marketing and sales capabilities, we may be unable to generate significant growth in our product revenues.

We started selling our ClearPoint system on a limited basis in August 2010, and we did not begin to meaningfully expand our sales and clinical support capabilities until 2013. As a result, we have relatively limited experience marketing and selling our ClearPoint system. Our operating results are directly dependent upon the marketing and sales efforts of our employees. If our team fails to adequately promote, market and sell our products, our sales will suffer.

We expect to continue building our team to market, sell and support our ClearPoint system products in the United States. That effort, though, could take longer than we anticipate, in which case our commercialization efforts would be negatively impacted. Our ability to achieve significant revenue growth will depend, in large part, on our success in recruiting, training, motivating and retaining a sufficient number of qualified personnel.

Federal legislation and other payment and policy changes may have a material adverse effect on our business.

The Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010, or, together, the Affordable Care Act, includes a number of provisions that should result in increased coordination between hospitals and physicians and alignment of financial incentives between hospitals and physicians to control hospital costs. Most significantly, the Affordable Care Act provides for a Medicare shared savings program whereby Medicare will share certain savings realized in the delivery of services to Medicare beneficiaries with accountable care organizations, which may be organized through various different legal structures between hospitals and physicians. Other payment reform provisions in the Affordable Care Act include pay-for-performance initiatives, payment bundling and the establishment of an independent payment advisory board. We expect that the overall result of such payment reform efforts and the increased coordination among hospitals and physicians will be voluntary reductions in the array of choices currently available to physicians with respect to diagnostic services, medical supplies and equipment. Such a reduction in physician choices may also result in hospitals reducing the overall number of vendors from which they purchase supplies, equipment and products. The Affordable Care Act could limit the acceptance and availability of our products, which would have an adverse effect on our financial results and business.

On April 16, 2015, President Obama signed into law, the Medicare Access and CHIP Reauthorization Act, or the Medicare Access Act, which removed the sustainable growth rate or SGR, methodology applicable to fees for physician services. The Medicare Access Act provides for a transition from the fee-for-service payment system to a more value-based system. In this process, reimbursements from the Medicare program may be reduced. As noted above, failure by hospitals and physicians to receive an amount that they consider to be adequate reimbursement for procedures in which our products are used will deter them from purchasing or using our products and will limit our sales growth.

Various healthcare reform proposals have also emerged at the state level. We cannot predict what healthcare initiatives will be implemented at the federal or state level, or the effect any recently promulgated or future legislation or regulation will have on us. However, an expansion in government’s role in the United States healthcare industry may lower reimbursements for our products, reduce medical procedure volumes and adversely affect our business, possibly materially.

If coverage and reimbursement from third-party payors for procedures utilizing our ClearPoint system products are inadequate, adoption of our products will be adversely affected and our revenues and prospects for profitability will suffer.

Our ClearPoint system products are purchased primarily by hospitals, which bill various third-party payors, including governmental healthcare programs, such as Medicare, and private insurance plans, for procedures in which our ClearPoint system is used. Reimbursement is a significant factor considered by hospitals in determining whether to acquire and utilize medical devices such as our ClearPoint system products. Therefore, our ability to successfully commercialize our ClearPoint system depends significantly on the adequacy of coverage and reimbursement from these third-party payors.

Third-party payors, whether foreign or domestic, or governmental or commercial, are developing increasingly sophisticated methods of controlling healthcare costs. In addition, in the United States, no uniform policy of coverage and reimbursement for medical device products and services exists among third-party payors. Therefore, coverage and reimbursement for medical device products and services can differ significantly from payor to payor. In addition, payors continually review new technologies for possible coverage and can, without notice, deny coverage for these new products and procedures. As a result, the coverage determination process is often a time-consuming and costly process that will require us to provide scientific and clinical support for the use of our products to each payor separately, with no assurance that coverage and adequate reimbursement will be obtained or maintained if obtained.

Reimbursement systems in international markets vary significantly by country and by region within some countries, and reimbursement approvals must be obtained on a country-by-country basis. In many international markets, a product must be approved for reimbursement before it can be approved for sale in that country. Further, many international markets have government-managed healthcare systems that control reimbursement for new devices and procedures. In most markets, there are private insurance systems as well as government-managed systems.

Because hospitals are reimbursed for the procedures in which our ClearPoint system products are used and our products are not separately reimbursed, the additional cost associated with the use of our products could impact hospital profit margins. Some hospitals could believe third-party reimbursement levels are not adequate to cover the cost of our ClearPoint system products. Furthermore, some physicians could believe third-party reimbursement levels are not adequate to compensate them for performing the procedures in which our products are used. Failure by hospitals and physicians, whether in the United States or abroad, to receive an amount that they consider to be adequate reimbursement for procedures in which our products are used will deter them from purchasing or using our products and will limit our revenues and prospects for profitability.

We currently have significant customer concentration, so economic difficulties or changes in the purchasing policies or patterns of our key customers could have a significant impact on our business and operating results.

A small number of our hospital customers account for a substantial portion of our revenues from sales of ClearPoint disposable products. Our two largest customers account for a disproportionately large portion of our ClearPoint product revenues. Sales to almost all our customers, including our two largest customers, are not based on long-term, committed volume purchase contracts, and we may not continue to generate a similar level of revenues from these customers, or any other customer. Because of our current customer concentration, our revenues could fluctuate, possibly significantly, due to a reduction or delay in orders from any of our significant customers, which could harm our business and results of operations.

We have limited internal manufacturing resources, and if we are unable to provide an adequate supply of our ClearPoint disposable products, our growth could be limited and our business could be harmed.

Final assembly of many of our ClearPoint disposable components occurs at our Irvine, California facility. If our facility experiences a disruption, we would have no other means of assembling those components until we are able to restore the manufacturing capability at our current facility or develop the same capability at an alternative facility.

In connection with the continued commercialization of our ClearPoint system, we expect that we will need to increase, or “scale up,” the production process of our disposable components over the current level of production. While we have taken steps in anticipation of growth, manufacturers often encounter difficulties in scaling up production, such as problems involving yields, quality control and assurance, and shortages of qualified personnel. If the scaled-up production process is not efficient or produces a product that does not meet quality and other standards, we may be unable to meet market demand and our revenues, business and financial prospects would be adversely affected.

Our reliance on single-source suppliers could harm our ability to meet demand for our ClearPoint system in a timely manner or within budget.

Many of the components and component assemblies of our ClearPoint system are provided to us by single-source suppliers. We generally purchase components and component assemblies through purchase orders rather than long-term supply agreements and generally do not maintain large volumes of inventory. While alternative suppliers exist and have been identified for substantially all components, the disruption or termination of the supply of components and component assemblies could cause a significant increase in the cost of these components, which could affect our operating results. Our dependence on a limited number of third-party suppliers and the challenges we may face in obtaining adequate supplies involve several risks, including limited control over pricing, availability, quality and delivery schedules. A disruption or termination in the supply of components could also result in our inability to meet demand for our ClearPoint system, which could harm our ability to generate revenues, lead to customer dissatisfaction and damage our reputation. Furthermore, if we are required to change the supplier of a key component or component assembly of our ClearPoint system, we may be required to verify that the new supplier maintains facilities and procedures that comply with quality standards and with all applicable regulations and guidelines. The delays associated with the verification of a new supplier could also adversely affect our ability to meet demand for our ClearPoint system.

Our ClearTrace system remains a product candidate in development. We cannot be certain that we will be able to successfully complete development of, and obtain regulatory clearances or approvals for, our ClearTrace system in a timely fashion, or at all.

Our ClearTrace system is a product candidate in development, although we suspended our ClearTrace development program in 2015 to enable us to focus resources on our ClearPoint system. At the time we suspended our ClearTrace development work, we had conducted only animal studies and other preclinical work with respect to that product candidate. Our ClearTrace system will require substantial additional development and testing. There can be no assurance that we will resume our ClearTrace development program, or that, if resumed, our development efforts will be successfully completed, or that the ClearTrace system will have the capabilities we expect. If we resume our work, we may encounter significant difficulties and costs during the course of our development efforts and we may encounter significant additional delays. Even if we successfully complete development of our ClearTrace system, there can be no assurance that we will obtain the regulatory clearances or approvals to market and commercialize it. If we are unable to obtain regulatory clearances or approvals for our ClearTrace system, or otherwise experience delays in obtaining such regulatory clearances or approvals, the commercialization of the ClearTrace system will be delayed or prevented. Even if cleared or approved, the ClearTrace system may not be cleared or approved for the indications that are necessary or desirable for successful commercialization. Delays in developing our ClearTrace system or obtaining regulatory clearances or approvals may also result in the loss of potential competitive advantages that might otherwise be attained by bringing products to market earlier than our competitors. Any of these contingencies could adversely affect our business. Likewise, in lieu of resuming our ClearTrace development program and undertaking the remaining development work, we may explore collaborations with one or more third parties pursuant to which the technologies underlying our ClearTrace system would be further developed and potentially commercialized. If we enter into any such collaboration with a third party, we may have to relinquish valuable rights to our ClearTrace system and its underlying technologies.

It is likely that we will not realize anticipated benefits from our collaborative agreement with Siemens regarding our ClearTrace system.

As discussed elsewhere in this Annual Report under “Business—Licenses and Collaborative Relationships—Siemens,” in February 2014 we entered into a development agreement with Siemens that relates to our ClearTrace system. That development agreement provides for certain commercial exclusivity in the field of MRI-guided catheter-based cardiac electrophysiology using catheters that are actively tracked by the MRI scanner. During the exclusivity period and within that particular exclusivity field, Siemens agreed not to engage in certain actions and activities, the intention being that we would have the exclusive opportunity to commercialize MRI-guided catheter-based cardiac electrophysiology with active catheter tracking with Siemens MRI systems. Likewise, during the exclusivity period and within the exclusivity field, we agreed not to sell or otherwise provide to any third party actively tracked catheters for commercial use that are intended to be used with a non-Siemens MRI system. However, the development agreement provides that, as a condition of continued exclusivity, we must release software and catheters for our ClearTrace system in the United States or European Union by the end of June 2016. Given the stage and status of our ClearTrace development program, we did not meet that milestone, and, as a result, Siemens has informed us that it has terminated the exclusivity provisions of the agreement. Based on Siemens’ termination of exclusivity, it is likely we will not realize some of the anticipated benefits from our development agreement with Siemens.

To the extent we seek a new indication for use of, or new claims for, our ClearPoint system, the FDA may not grant 510(k) clearance or premarket approval application (“PMA”) approval of such new use or claims, which may affect our ability to grow our business.

We received 510(k) clearance to market our ClearPoint system for use in general neurological interventional procedures. We could seek to obtain additional, more specific indications for use of our ClearPoint system beyond the general neurological intervention claim. To the extent we seek expanded claims for our ClearPoint system, such claims could, depending on their nature, require 510(k) clearance or FDA approval of a PMA. Moreover, some specific ClearPoint system claims could require clinical trials to support regulatory clearance or approval. In the event we seek a new indication for use of, or new claims for, the ClearPoint system that we believe are necessary or desirable for successful commercialization, the FDA may refuse our requests for 510(k) clearance or PMA approval. Likewise, to the extent clinical trials are necessary, we may not successfully complete or have the funds to initiate such clinical trials.

Clinical trials necessary to support 510(k) clearance or PMA approval for our ClearTrace system or any new indications for use for our ClearPoint system would be expensive and could require the enrollment of large numbers of suitable patients, who could be difficult to identify and recruit. Delays or failures in any necessary clinical trials would prevent us from commercializing any modified product or new product candidate and could adversely affect our business, operating results and prospects.

Initiating and completing clinical trials necessary to support 510(k) clearance or PMA approval for our ClearTrace system or any other product candidates that we may develop, or additional safety and efficacy data that the FDA may require for 510(k) clearance or PMA approval for any new specific indications of our ClearPoint system that we may seek, would be time consuming and expensive with an uncertain outcome. Moreover, the results of early clinical trials are not necessarily predictive of future results, and any product candidate we advance into clinical trials may not have favorable results in later clinical trials.

Conducting successful clinical trials could require the enrollment of large numbers of patients, and suitable patients could be difficult to identify and recruit. Patient enrollment in clinical trials and completion of patient participation and follow-up depends on many factors, including the size of the patient population, the nature of the trial protocol, the attractiveness of, or the discomforts and risks associated with, the treatments received by enrolled subjects, the availability of appropriate clinical trial investigators and support staff, the proximity to clinical sites of patients that are able to comply with the eligibility and exclusion criteria for participation in the clinical trial, and patient compliance. For example, patients could be discouraged from enrolling in our clinical trials if the trial protocol requires them to undergo extensive post-treatment procedures or follow-up to assess the safety and effectiveness of our product candidates or if they determine that the treatments received under the trial protocols are not attractive or involve unacceptable risks or discomforts. In addition, patients participating in clinical trials may die before completion of the trial or suffer adverse medical events unrelated to our product candidates.

Development of sufficient and appropriate clinical protocols to demonstrate safety and efficacy will be required and we may not adequately develop such protocols to support clearance or approval. Further, the FDA could require us to submit data on a greater number of patients than we originally anticipated and/or for a longer follow-up period or change the data collection requirements or data analysis applicable to our clinical trials. Delays in patient enrollment or failure of patients to continue to participate in a clinical trial could cause an increase in costs and delays in the approval and attempted commercialization of our product candidates or result in the failure of the clinical trial. Such increased costs and delays or failures could adversely affect our business, operating results and prospects.

The results of our clinical trials may not support our product candidate claims or any additional claims we may seek for our products and may result in the discovery of adverse side effects.

Even if any clinical trial that we need to undertake is completed as planned, we cannot be certain that its results will support our product candidate claims or any new indications that we may seek for our products or that the FDA or foreign authorities will agree with our conclusions regarding the results of those trials. The clinical trial process may fail to demonstrate that our products or a product candidate is safe and effective for the proposed indicated use, which could cause us to stop seeking additional clearances or approvals for our ClearPoint system, abandon our ClearTrace system or delay development of other product candidates. Any delay or termination of our clinical trials will delay the filing of our regulatory submissions and, ultimately, our ability to commercialize a product candidate. It is also possible that patients enrolled in clinical trials will experience adverse side effects that are not currently part of the product candidate’s profile.

The markets for medical devices are highly competitive, and we may not be able to compete effectively against the larger, well-established companies in our markets or emerging and small innovative companies that may seek to obtain or increase their share of the market.

We will face competition from products and techniques already in existence in the marketplace. The markets for the ClearPoint system and the ClearTrace system are intensely competitive, and many of our competitors are much larger and have substantially more financial and human resources than we do. Many have long histories and strong reputations within the industry, and a relatively small number of companies dominate these markets. Examples of such large, well-known companies include Medtronic, PLC, St. Jude Medical Inc. and Biosense Webster Inc., a division of Johnson & Johnson.

These companies enjoy significant competitive advantages over us, including:

We may not succeed in overcoming the competitive advantages of these large and established companies. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies. These companies may introduce products that compete effectively against our products in terms of performance, price or both.

Our business will be subject to economic, political, regulatory and other risks associated with international operations.

At present, our commercialization activities for our ClearPoint system are focused in the United States. However, we do have CE marking approval to market our ClearPoint system in the European Union. In addition, we ultimately intend to market our ClearPoint system in other foreign jurisdictions as well. There are a number of risks associated with conducting business internationally, including:

Any of these risks could adversely affect our financial results and our ability to operate outside the United States, which could harm our business.

Risks Related to Our Financial Position

We have incurred losses since our inception and we may continue to incur losses. If we fail to generate significant revenue from sales of our products, we may never achieve or sustain profitability.

We have incurred losses in each year since our inception in 1998 that have resulted principally from costs incurred in connection with our sales and marketing activities, research and development efforts, manufacturing activities and other general and administrative expenses associated with our operations, and we may continue to incur losses as we continue to invest capital in the sales and marketing of our ClearPoint products, development of our ClearTrace system and growth of our business generally.

As a result of the numerous risks and uncertainties associated with developing medical devices, we are unable to predict the extent of any future losses or when we will become profitable, if at all. Our profitability will depend on revenues from the sale of our products. We cannot provide any assurance that we will ever achieve profitability and, even if we achieve profitability, that we will be able to sustain or increase profitability on a quarterly or annual basis. Further, because of our relatively limited commercialization history, we have limited insight into the trends that may emerge and affect our business. We may make errors in predicting and reacting to relevant business trends, which could harm our business and financial condition. Any failure to achieve and maintain profitability would continue to have an adverse effect on our stockholders’ equity and working capital and could result in a decline in our stock price or cause us to cease operations.

Our level of indebtedness and debt service obligations could adversely affect our financial condition, and may make it more difficult for us to fund our operations.

We have a significant amount of debt, including: (i) a senior secured note payable to Brainlab, or the Brainlab Note, which was originally issued to Brainlab on April 5, 2011, and subsequently amended and restated on March 6, 2013 and on April 4, 2016, that matures in December 2018, with an aggregate principal amount of $2.0 million bearing interest at 5.5% annum, compounded simply, paid quarterly in arrears; (ii) notes payable to certain holders that mature in March 2019, with an aggregate principal amount of approximately $2.0 million payable at maturity and interest accruing at 12% per annum payable semi-annually, or the 2014 Secured Notes; and (iii) notes payable to certain holders that mature in November 2020 with both principal of $3.0 million and interest accruing at 3.5% per annum payable in a single installment upon maturity, or the 2010 Secured Notes, and together with the Brainlab Note and the 2014 Secured Notes, the Notes. Our obligations under the Notes are secured by all our existing property and assets, with the Brainlab Note having a first priority followed in order by the 2014 Secured Notes and the 2010 Secured Notes. The Notes may create additional financing risk for us, particularly if our business or prevailing financial market conditions are not conducive to paying off or refinancing our outstanding debt obligations at maturity. The Notes will require us to repay our indebtedness by making payments of interest and principal, which will reduce the amount of money available to finance our operations, our commercialization efforts and other general corporate activities. To the extent additional debt is added to our current debt levels, the risk described above could increase.

We may need additional funding for our business, and we may not be able to raise capital when needed or on terms that are acceptable to us, which could force us to delay, reduce or eliminate our commercialization efforts or our product development programs.

The cumulative net loss from our inception through December 31, 2017 was approximately $101 million. Net cash used in operations was $6.0 million for the year ended December 31, 2017. Since our inception, we have financed our operations principally from the sale of equity securities, the issuance of notes payable and license arrangements. Recent such financing activities consist of: (i) a May 2017 private placement of equity, which resulted in net proceeds of $12.0 million; (ii) a September 2016 private placement of equity, which resulted in net proceeds of $4.1 million; (iii) along with the September 2016 private placement, a simultaneous sale of units (consisting of common stock and warrants to purchase common stock) to certain existing holders of the Company’s convertible promissory notes and common stock warrants issued by the Company in connection therewith, resulting in the conversion of notes into units and the adjustment of the exercise price of existing warrants (the transactions described in this clause (iii) are also referred to herein as the Note Conversion); (iv) an April 2016 restructuring of our existing debt to Brainlab, or the Restructuring Transaction, including the issuance to Brainlab of shares of our common stock and warrants to purchase additional shares of our common stock; (v) a December 2015 private placement of equity, which resulted in net proceeds of $4.7 million; (vi) a December 2014 private placement of equity, which resulted in net proceeds of $9.4 million; and (vii) a March 2014 private placement of debt and warrants, which resulted in net proceeds of $3.5 million. In addition, in March 2014, we completed a transaction with Boston Scientific that resulted in the cancellation of $4.3 million in related party convertible notes payable held by Boston Scientific which were scheduled to mature in 2014.

Our plans reflect our anticipation of increases in revenues from sales of the ClearPoint system and related disposable products as a result of greater utilization at existing installed sites and the installation of the ClearPoint system at new sites. We also anticipate maintaining recurring operating expenses at historical levels, with expected decreases in general and administrative expenses being offset by increases in selling and marketing expenses associated with the anticipated growth in revenues. However, there is no assurance that we will be able to achieve anticipated results, and even in the event such results are achieved, we expect to continue to consume cash in operations over at least the next twelve months.

As a result of the foregoing, we believe it may be necessary to seek additional sources of funds from the sale of equity or debt securities, which likely would result in dilution to existing ownership interests, or from the establishment of a credit facility. There is no assurance, however, that we will be able to obtain such additional financing on commercially reasonable terms, if at all, and there is no assurance that any additional financing we do obtain will be sufficient to meet our needs. If we are not able to obtain the additional financing on a timely basis, we may be unable to achieve anticipated results, and may not be able to meet other obligations as they become due. An inability to obtain a sufficient amount of additional funding would create substantial doubt as to our ability to continue as a going concern.

The funding requirements for our business will depend on many factors, including:

Raising additional funds may cause dilution to existing stockholders, restrict our operations or require us to relinquish proprietary rights.

To the extent we raise additional capital through the sale of equity or convertible debt securities, existing ownership interests will be diluted, and the terms may include liquidation or other preferences that adversely affect such existing stockholders’ rights. Debt financing, if available, may involve agreements that include covenants limiting or restricting our ability to take specific actions such as incurring additional debt, making capital expenditures or declaring dividends. If we secure additional funds through arrangements with a strategic or other collaboration partner, we may have to relinquish valuable rights to our technologies, products or product candidates or grant licenses on terms that are not favorable to us. Any of these events could adversely affect our ability to achieve our commercialization and/or product development goals and have a material adverse effect on our business, financial condition, results of operations and prospects.

Risks Related to Our Intellectual Property

If we, or the third parties from whom we license intellectual property, are unable to secure and maintain patent or other intellectual property protection for the intellectual property covering our marketed products or our product candidates, our ability to compete will be harmed.

Our commercial success depends, in part, on obtaining patent and other intellectual property protection for the technologies contained in our products and product candidates. The patent positions of medical device companies, including ours, can be highly uncertain and involve complex and evolving legal and factual questions. Our patent position is uncertain and complex, in part, because of our dependence on intellectual property that we license from others. If we, or the third parties from whom we license intellectual property, fail to obtain adequate patent or other intellectual property protection for intellectual property covering our products or product candidates, or if any protection is reduced or eliminated, others could use the intellectual property covering our products or product candidates, resulting in harm to our competitive business position. In addition, patent and other intellectual property protection may not provide us with a competitive advantage against competitors that devise ways of making competitive products without infringing any patents that we own or to which we have rights.

United States patents and patent applications may be subject to interference proceedings and United States patents may be subject to reissue and reexamination proceedings in the United States Patent and Trademark Office. Foreign patents may be subject to opposition or comparable proceedings in the corresponding foreign patent offices. Any of these proceedings could result in either loss of the patent or denial of the patent application, or loss or reduction in the scope of one or more of the claims of the patent or patent application. Changes in either patent laws or in interpretations of patent laws may also diminish the value of our intellectual property or narrow the scope of our protection. Interference, reexamination and opposition proceedings may be costly and time consuming, and we, or the third parties from whom we license intellectual property, may be unsuccessful in such proceedings. Thus, any patents that we own or license may provide limited or no protection against competitors. In addition, our pending patent applications and those we may file in the future may not result in patents being issued or may have claims that do not cover our products or product candidates. Even if any of our pending or future patent applications are issued, they may not provide us with adequate protection or any competitive advantages. Our ability to develop additional patentable technology is also uncertain.

Non-payment or delay in payment of patent fees or annuities, whether intentional or unintentional, may also result in the loss of patents or patent rights important to our business. Many countries, including certain countries in Europe, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, many countries limit the enforceability of patents against third parties, including government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of the patent. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as do the laws of the United States, particularly in the field of medical devices and procedures.

Others may assert that our products infringe their intellectual property rights, which may cause us to engage in costly disputes and, if we are not successful in defending ourselves, could also cause us to pay substantial damages and prohibit us from selling our marketed products.

There may be United States and foreign patents issued to third parties that relate to our business, including MRI-guided intervention systems and the components and methods and processes related to these systems. Some of these patents may be broad enough to cover one or more aspects of our present technologies and/or may cover aspects of our future technologies. We do not know whether any of these patents, if they exist and if asserted, would be held valid, enforceable and infringed. We cannot provide any assurance that a court or administrative body would agree with any arguments or defenses we may have concerning invalidity, unenforceability or non-infringement of any third-party patent. The medical device industry has been characterized by extensive litigation and administrative proceedings regarding patents and other intellectual property rights, and companies have employed such actions to gain a competitive advantage. If third parties assert infringement or other intellectual property claims against us, our management personnel will experience a significant diversion of time and effort and we will incur large expenses defending our company. If third parties in any patent action are successful, our patent portfolio may be damaged, we may have to pay substantial damages and we may be required to stop selling our products or obtain a license which, if available at all, may require us to pay substantial royalties. We cannot be certain that we will have the financial resources or the substantive arguments to defend our products from infringement or our patents from claims of invalidity or unenforceability, or to defend our products against allegations of infringement of third-party patents. In addition, any public announcements related to litigation or administrative proceedings initiated by us, or initiated or threatened against us, could negatively impact our business.

If the combination of patents, trade secrets and contractual provisions that we rely on to protect our intellectual property is inadequate, our ability to successfully commercialize our marketed products and product candidates will be harmed, and we may not be able to operate our business profitably.

Our success and ability to compete is dependent, in part, upon our ability to maintain the proprietary nature of our technologies. We rely on a combination of patent, copyright, trademark and trade secret law and nondisclosure agreements to protect our intellectual property. However, such methods may not be adequate to protect us or permit us to gain or maintain a competitive advantage. Our patent applications may not issue as patents in a form that will be advantageous to us, or at all. Our issued patents, and those that may issue in the future, may be challenged, invalidated or circumvented, which could limit our ability to stop competitors from marketing related products.

To protect our proprietary rights, we may in the future need to assert claims of infringement against third parties to protect our intellectual property. There can be no assurance that we will be successful on the merits in any enforcement effort. In addition, we may not have sufficient resources to litigate, enforce or defend our intellectual property rights. Litigation to enforce our intellectual property rights in patents, copyrights or trademarks is highly unpredictable, expensive and time consuming and would divert human and monetary resources away from managing our business, all of which could have a material adverse effect on our financial condition and results of operations even if we were to prevail in such litigation. In the event of an adverse judgment, a court could hold that some or all of our asserted intellectual property rights are not infringed, or that they are invalid or unenforceable, and could award attorney fees.

Despite our efforts to safeguard our unpatented and unregistered intellectual property rights, we may not be successful in doing so or the steps taken by us in this regard may not be adequate to detect or deter misappropriation of our technologies or to prevent an unauthorized third party from copying or otherwise obtaining and using our products, technologies or other information that we regard as proprietary. Additionally, third parties may be able to design around our patents. Furthermore, the laws of foreign countries may not protect our proprietary rights to the same extent as the laws of the United States. Our inability to adequately protect our intellectual property could allow our competitors and others to produce products based on our technologies, which could substantially impair our ability to compete.

We have entered into confidentiality and intellectual property assignment agreements with our employees and consultants as one of the ways we seek to protect our intellectual property and other proprietary technologies. However, these agreements may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements.

Our employees and consultants may unintentionally or willfully disclose our confidential information to competitors, and confidentiality agreements may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. Enforcing a claim that a third party illegally obtained and is using our proprietary know-how is expensive and time-consuming, and the outcome is unpredictable. In addition, courts outside the United States are sometimes less willing to protect know-how than courts in the United States. Moreover, our competitors may independently develop equivalent knowledge, methods and know-how. Failure to obtain or maintain intellectual property protection could adversely affect our competitive business position.

If we lose access to third-party software that is integrated into our ClearPoint system software, our costs could increase and new installations of our ClearPoint system could be delayed, potentially hurting our competitive position.

We have received a non-exclusive, non-transferable, worldwide license from a third party to certain software, in source code form, that is integrated into the software component of our ClearPoint system. In return, we agreed to pay the third party a one-time license fee, as well as a license fee for each copy of the ClearPoint system software that we distribute, subject to certain minimum license purchase commitments which we already have satisfied. The source code license is perpetual, except in the event we breach our agreement with the third party, in which case the third party may terminate the license for cause. A loss of the license could impede our ability to install our ClearPoint system at new sites until equivalent software could be identified, licensed or developed, and integrated into the software component of our ClearPoint system. These delays, if they occur, would harm our business, operating results and financial condition.

We may be dependent upon one of our licenses from The Johns Hopkins University to develop and commercialize some components of the ClearTrace system.

We have entered into exclusive license agreements with The Johns Hopkins University, or Johns Hopkins, with respect to a number of technologies owned by Johns Hopkins. Under one of those agreements, which we entered into in 1998, we licensed a number of technologies relating to devices, systems and methods for performing MRI-guided interventions, particularly MRI-guided cardiac ablation procedures. Therefore, that license is important to the development of the ClearTrace system. Without that license, we may not be able to commercialize some of the components of the ClearTrace system, when and if developed, subject to regulatory clearance or approval. Johns Hopkins has the right to terminate the license under specified circumstances, including a breach by us and failure to cure such breach. We are obligated to use commercially reasonable efforts to develop and commercialize products based on the licensed patents and patent applications. This obligation could require us to take actions related to the development of the ClearTrace system that we would otherwise not take.

Risks Related to Legal and Regulatory Compliance

We operate in a highly-regulated industry and any failure to comply with the extensive government regulations may subject us to fines, injunctions and other penalties that could harm our business.

We are subject to extensive regulation by the FDA and various other federal, state and foreign governmental authorities. Government regulations and foreign requirements specific to medical devices are wide ranging and govern, among other things:

We are subject to ongoing FDA requirements, including: required submissions of safety and other post-market information; manufacturing facility registration and device listing requirements; compliance with the FDA’s medical device current Good Manufacturing Practice regulations, as codified in the Quality System Regulation, or QSR; requirements regarding field corrections and removals of our marketed products; reporting of adverse events and certain product malfunctions to the FDA; and numerous recordkeeping requirements. If we or any of our collaborators or suppliers fail to comply with applicable regulatory requirements, a regulatory agency may take action against us, including any of the following sanctions:

The FDA’s and foreign regulatory agencies’ statutes, regulations or policies may change, and additional government regulation or statutes may be enacted, which could increase post-approval regulatory requirements, or delay, suspend or prevent marketing of our products. We cannot predict the likelihood, nature or extent of adverse governmental regulation that might arise from future legislative or administrative action, either in the United States or abroad.

We could become subject to product liability claims that could be expensive, divert management’s attention and harm our business.

Our business exposes us to potential product liability risks that are inherent in the manufacturing, marketing and sale of medical devices. We may be held liable if our products cause injury or death or are found otherwise unsuitable or defective during usage. Our ClearPoint system and our ClearTrace system each incorporates mechanical and electrical parts, complex computer software and other sophisticated components, any of which can have defective or inferior parts or contain defects, errors or failures. Complex computer software is particularly vulnerable to errors and failures, especially when first introduced.

Because our ClearPoint system and our ClearTrace system are each designed to be used to perform complex surgical procedures, defects could result in a number of complications, some of which could be serious and could harm or kill patients. The adverse publicity resulting from any of these events could cause physicians or hospitals to review and potentially terminate their relationships with us.

The medical device industry has historically been subject to extensive litigation over product liability claims. A product liability claim, regardless of its merit or eventual outcome, could result in significant legal defense costs. Although we maintain product liability insurance that we believe is appropriate, this insurance coverage is subject to deductibles and coverage limitations, and may not be adequate to protect us against any future product liability claims. Additionally, we may be unable to maintain our existing product liability insurance in the future at satisfactory rates or in adequate amounts. A product liability claim, regardless of its merit or eventual outcome, could result in:

 Our products may in the future be subject to product recalls that could harm our reputation, business operating results and financial condition. Likewise, products that are manufactured and sold by third parties and that are needed for procedures in which physicians use our products also may be subject to recalls, which could adversely impact our business, operating results and financial condition.

The FDA and similar foreign governmental authorities have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design, manufacture or labeling. In the case of the FDA, the authority to require a recall must be based on an FDA finding that there is a reasonable probability that the device would cause serious injury or death. In addition, foreign governmental bodies have the authority to require the recall of our products in the event of material deficiencies or defects in design or manufacture. Manufacturers may, under their own initiative, recall a product if any material deficiency in a device is found. A government-mandated or voluntary recall by us could occur as a result of component failures, manufacturing errors, design or labeling defects or other deficiencies and issues. Recalls of any of our products would divert managerial and financial resources and have an adverse effect on our financial condition and results of operations. We may initiate certain voluntary recalls involving our products in the future. Companies are required to maintain certain records of recalls, even if they are not reportable to the FDA. If we determine that certain of those recalls do not require notification to the FDA, the FDA may disagree with our determinations and require us to report those actions as recalls. A future recall announcement could harm our reputation with customers and negatively affect our sales. In addition, the FDA could take enforcement actions against us, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers’ demands. Regulatory investigations or product recalls could also result in our incurring substantial costs, losing revenues and implementing a change in the design, manufacturing process or the indications for which our products may be used, each of which would harm our business.

In addition, products that are manufactured and sold by other companies and that are needed for procedures in which physicians use our ClearPoint system also could become subject to a recall. Our ClearPoint system is designed to enable a range of minimally-invasive procedures in the brain. Those procedures involve insertion of a catheter, probe, electrode or other similar device into a target region of the brain, and most of those devices are manufactured and sold by other companies. Any of those devices may become the subject of a recall, whether required by the FDA or a foreign governmental body or initiated by the third party manufacturer. The shortage or absence of any of those devices in the marketplace could adversely impact the number of procedures performed by physicians using our ClearPoint system, which would adversely impact our financial condition and results of operations.

If our products cause or contribute to a death or a serious injury, or malfunction in certain ways, we will be subject to Medical Device Reporting regulations, which can result in voluntary corrective actions or agency enforcement actions.

Under the FDA’s Medical Device Reporting regulations, we are required to report to the FDA any incident in which our products may have caused or contributed to a death or serious injury or in which our products malfunctioned and, if the malfunction were to recur, would likely cause or contribute to death or serious injury. In the future, we may experience events that may require reporting to the FDA pursuant to the medical device reporting regulations. In addition, all manufacturers placing medical devices in European Union markets are legally bound to report any serious or potentially serious incidents involving devices they produce or sell to the relevant authority in whose jurisdiction the incident occurred. Any adverse event involving our products could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection, mandatory recall or other enforcement action. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital, distract management from operating our business, and may harm our reputation and financial results. In addition, failure to report such adverse events to appropriate government authorities on a timely basis, or at all, could result in an enforcement action against us.

We may incur significant liability if it is determined that we are promoting off-label uses of our products in violation of federal and state regulations in the United States or elsewhere.

We obtained 510(k) clearance of our ClearPoint system from the FDA for a general neurological intervention claim. This general neurological intervention indication is the same indication for use that applies to other devices that have traditionally been used in the performance of stereotactic neurological procedures. Unless and until we receive regulatory clearance or approval for use of our ClearPoint system in specific procedures, uses in procedures other than general neurological interventional procedures, such as biopsies and catheter and electrode insertions, may be considered off-label uses of our ClearPoint system.

Under the federal Food, Drug, and Cosmetic Act and other similar laws, we are prohibited from labeling or promoting our ClearPoint system, or training physicians, for such off-label uses. The FDA defines labeling to include not only the physical label attached to the product, but also items accompanying the product. This definition also includes items as diverse as materials that appear on a company’s website. As a result, we are not permitted to promote off-label uses of our products, whether on our website, in product brochures or in customer communications. However, although manufacturers are not permitted to promote for off-label uses, in their practice of medicine, physicians may lawfully choose to use medical devices for off-label uses. Therefore, a physician could use our ClearPoint system for uses not covered by the cleared labeling.

The FDA and other regulatory agencies actively enforce regulations prohibiting promotion of off-label uses and the promotion of products for which marketing clearance or approval has not been obtained. If the FDA determines that our promotional materials or training constitutes promotion of an off-label use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, warning letter, injunction, seizure, civil fine and criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an unapproved use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement. In that event, our reputation could be damaged and market adoption of our products would be impaired. In addition, the off-label use of our products may increase the risk of injury to patients, and, in turn, the risk of product liability claims. Product liability claims are expensive to defend and could divert our management’s attention and result in substantial damage awards against us.

If we or our third-party suppliers fail to comply with the FDA’s QSR or any applicable state equivalent, our manufacturing operations could be interrupted and our potential product sales and operating results could suffer.

We and some of our third-party suppliers are required to comply with the FDA’s QSR, which covers the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of our products and product candidates. We and our suppliers will also be subject to the regulations of foreign jurisdictions regarding the manufacturing process to the extent we market our products in these jurisdictions. The FDA enforces the QSR through periodic and unannounced inspections of manufacturing facilities. Our facilities were last inspected by the FDA for QSR compliance in September 2014. We anticipate that we and certain of our third-party suppliers will be subject to future inspections. The failure by us or one of our third-party suppliers to comply with applicable statutes and regulations administered by the FDA and other regulatory bodies, or the failure to timely and adequately respond to any adverse inspectional observations, could result in enforcement actions against us, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers’ demands. If we fail to comply with the FDA’s QSR or any applicable state equivalent, we would be required to incur the costs and take the actions necessary to bring our operations into compliance, which may have a negative impact on our future sales and our ability to generate a profit.

We may be subject, directly or indirectly, to federal and state healthcare fraud and abuse laws and regulations and could face substantial penalties if we are unable to fully comply with such laws.

Although we do not provide healthcare services or receive payments directly from Medicare, Medicaid or other third-party payors for our products or the procedures in which our products may be used, many state and federal healthcare laws and regulations governing financial relationships between medical device companies and healthcare providers apply to our business and we could be subject to enforcement by both the federal government, private whistleblowers and the states in which we conduct our business. The healthcare laws and regulations that may affect our ability to operate include:

The medical device industry has been under heightened scrutiny as the subject of government investigations and government enforcement or private whistleblower actions under the Anti-Kickback Statute and the False Claims Act involving manufacturers who allegedly offered unlawful inducements to potential or existing customers in an attempt to procure their business, including specifically arrangements with physician consultants.

We may from time to time have agreements with physicians that could be scrutinized or could be subject to reporting requirements in the future, including consulting contracts in which we compensate physicians for various services, which could include:

The Affordable Care Act mandates increased transparency of arrangements between physicians and medical device companies, which we expect will increase our overall cost of compliance. We believe that this increased transparency will also result in a heightened level of government scrutiny of the relationships between physicians and medical device companies. While we believe that all of our arrangements with physicians comply with applicable law, the increased level of scrutiny, coupled with the expanded enforcement tools available to the government under the Affordable Care Act, may increase the likelihood of a governmental investigation. If we become subject to such an investigation, our business and operations would be adversely affected even if we ultimately prevail because the cost of defending such investigation would be substantial. Moreover, companies subject to governmental investigations could lose both overall market value and market share during the course of the investigation.

In addition, we may provide customers with information on products that could be deemed to influence their coding or billing practices, and may have sales, marketing or other arrangements with hospitals and other providers that could also be the subject of scrutiny under these laws. If our operations are found to be in violation of any of the laws described above or any other governmental regulations that apply to us, we may be subject to penalties, including civil and criminal penalties, damages, fines, exclusion from the Medicare and Medicaid programs and the curtailment or restructuring of our operations. Any penalties, damages, fines, exclusions, curtailment or restructuring of our operations could adversely affect our ability to operate our business and our financial results. The risk of our being found in violation of these laws is increased by the fact that many of these laws are broad and their provisions are open to a variety of interpretations. Any action against us for violation of these laws, even if we successfully defend against it, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business. If the physicians or other providers or entities with which we do business are found to be non-compliant with applicable laws, they may be subject to sanctions, which could also have a negative impact on our business.

We may be subject to privacy and data protection laws governing the transmission, use, disclosure, security and privacy of health information which may impose restrictions on technologies and subject us to penalties if we are unable to fully comply with such laws.

Numerous federal, state and international laws and regulations govern the collection, use, disclosure, storage and transmission of patient-identifiable health information. These laws include:

We are required to comply with federal and state laws governing the transmission, security and privacy of patient identifiable health information that we may obtain or have access to in connection with manufacture and sale of our products. We do not believe that we are a HIPAA-covered entity because we do not submit electronic claims to third-party payors, but there may be limited circumstances in which we may operate as a business associate to covered entities if we receive patient identifiable data through activities on behalf of a healthcare provider. We may be required to make costly system modifications to comply with the HIPAA privacy and security requirements that will be imposed on us contractually through business associate agreements by covered entities and directly under HITECH or HIPAA regulations. Our failure to comply may result in criminal and civil liability because the potential for enforcement action against business associates is now greater. Enforcement actions can be costly and interrupt regular operations which may adversely affect our business.

In addition, numerous other federal and state laws protect the confidentiality of patient information as well as employee personal information, including state medical privacy laws, state social security number protection laws, state data breach laws and federal and state consumer protection laws. These various laws in many cases are not preempted by the HIPAA rules and may be subject to varying interpretations by the courts and government agencies, creating complex compliance issues for us and our customers and potentially exposing us to additional expense, adverse publicity and liability. In connection with any clinical trials we conduct, we will be subject to state and federal privacy and human subject protection regulations. The HIPAA requirements and other human subjects research laws could create liability for us or increase our cost of doing business because we must depend on our research collaborators to comply with the applicable laws. We may adopt policies and procedures that facilitate our collaborators’ compliance, and contractually require compliance, but we cannot ensure that non-employee collaborators or investigators will comply with applicable laws. As a result, unauthorized uses and disclosures of research subject information in violation of the law may occur. Any such violations could lead to sanctions that could adversely affect our business.

Changes in U.S. tax laws could have a material adverse effect on our business, cash flow, results of operations and financial conditions.

On December 22, 2017, the U.S. government enacted comprehensive Federal tax legislation commonly referred to as the Tax Cuts and Jobs Act of 2017 (the “Tax Act”). The Tax Act introduces significant changes to U.S. income tax law that could have a meaningful impact on our provision for income taxes. Accounting for the income tax effects of the Tax Act requires significant judgments and estimates in the interpretation and calculations of the provisions of the Tax Act.

Due to the timing of the enactment and the complexity involved in applying the provisions of the Tax Act, we made reasonable estimates of the effects and recorded provisional amounts in our financial statements for the year ended December 31, 2017. The U.S. Treasury Department, the Internal Revenue Service (“IRS”), and other standard-setting bodies may issue guidance on how the provisions of the Tax Act will be applied or otherwise administered that is different from our interpretation. As we collect and prepare necessary data and interpret the Tax Act and any additional guidance issued by the IRS or other standard-setting bodies, we may make adjustments to the provisional amounts that could materially affect our financial position and results of operations as well as our effective tax rate in the period in which the adjustments are made.

Risks Related to Our Facilities, Employees and Growth

We are dependent on our senior management team, our sales, clinical support and marketing team and our engineering team, and the loss of any of them could harm our business.

All our employees, including the members of our senior management team, are at-will employees, and therefore they may terminate employment with us at any time. Accordingly, there are no assurances that the services of any of our employees will be available to us for any specified period of time. The loss of members of our senior management team, our sales, clinical support and marketing team or our engineering team, or our inability to attract or retain other qualified personnel, could have a material adverse effect on our business, financial condition and results of operations. If the need to replace any of our key employees arises, the replacement process likely would involve significant time and costs, and may significantly delay or prevent the achievement of our business objectives.

Damage to our reputation could harm our businesses, including our competitive position and business prospects.

Our ability to attract and retain customers, supplier, investors and employees is impacted by our reputation. Harm to our reputation can arise from various sources, including employee misconduct, security breaches, unethical behavior, litigation or regulatory outcomes, the suitability or harm, which could, among other consequences, increase the size and number of litigation claims and damages asserted or subject us to enforcement actions, fines and penalties and cause us to incur related costs and expenses.

 We need to hire and retain additional qualified personnel to grow and manage our business. If we are unable to attract and retain qualified personnel, our business and growth could be seriously harmed.

Our performance depends on the talents and efforts of our employees. Our future success will depend on our ability to attract, retain and motivate highly skilled personnel in all areas of our organization, but particularly as part of our sales, clinical support and marketing team. We plan to continue to grow our business and will need to hire additional personnel to support this growth. It is often difficult to hire and retain these persons, and we may be unable to replace key persons if they leave or fill new positions requiring key persons with appropriate experience. If we experience difficulties locating and hiring suitable personnel in the future, our growth may be hindered. Qualified individuals are in high demand, particularly in the medical device industry, and we may incur significant costs to attract and retain them. If we are unable to attract and retain the personnel we need to succeed, our business and growth could be harmed.

If we do not effectively manage our growth, we may be unable to successfully market and sell our products or develop our product candidates.

Our future revenue and operating results will depend on our ability to manage the anticipated growth of our business. In order to achieve our business objectives, we must continue to grow. However, continued growth presents numerous challenges, including:

We cannot be certain that our systems, controls, infrastructure and personnel will be adequate to support our future operations. Any failure to effectively manage our growth could impede our ability to successfully develop, market and sell our products and our business will be harmed.

Our operations are vulnerable to interruption or loss due to natural disasters, power loss and other events beyond our control, which would adversely affect our business.

We do not have redundant facilities. We conduct substantially all our activities, including executive management, research and development, component processing, final assembly, packaging and distribution activities for our ClearPoint system, at our facility located in Irvine, California, which is a seismically active area that has experienced major earthquakes in the past, as well as other natural disasters, including wildfires. We have taken precautions to safeguard our facility, including obtaining business interruption insurance. However, any future natural disaster, such as an earthquake or a wildfire, could significantly disrupt our operations, and delay or prevent product assembly and shipment during the time required to repair, rebuild or replace our facility, which could be lengthy and result in significant expenses. Furthermore, the insurance coverage we maintain may not be adequate to cover our losses in any particular case or continue to be available at commercially reasonable rates and terms. In addition, our facility may be subject to shortages of electrical power, natural gas, water and other energy supplies. Any future shortage or conservation measure could disrupt our operations and cause expense, thus adversely affecting our business and financial results.

Our corporate headquarters is leased, and if we are unable to renew the lease on similar terms, we could be materially and adversely affected.

Our corporate headquarters is leased, and the lease is set to expire in September 2018.  We can provide no assurances that we will be able to renew our lease upon expiration on similar terms, or at all. If we are unable to renew our lease on similar terms, it may have a material and adverse effect on our business and operations.

Risks Related to Our Common Stock

Our common stock may be traded infrequently and in low volumes, so stockholders may be unable to sell their shares of common stock at or near the quoted bid prices if they wish to sell their shares.

The shares of our common stock may trade infrequently and in low volumes in the over-the-counter market, meaning that the number of persons interested in purchasing our common shares at or near bid prices at any given time may be relatively small or non-existent. This situation may be attributable to a number of factors, including the fact that we are a small company which is relatively unknown to stock analysts, stock brokers, institutional investors and others in the investment community who can generate or influence sales volume. Even if we come to the attention of such institutionally oriented persons, they may be risk-averse in the current economic environment and could be reluctant to follow a company such as ours or purchase or recommend the purchase of our shares until such time as we become more seasoned. As a consequence, there may be periods of several days or more when trading activity in our shares is minimal or non-existent, as compared to a seasoned issuer which has a large and steady volume of trading activity that will generally support continuous sales without an adverse effect on share price. We cannot give any assurance that a broader or more active public trading market for our shares will develop or be sustained. Due to these conditions, we can give no assurance that stockholders will be able to sell their shares at or near bid prices or at all if they need money or otherwise desire to liquidate their shares. As a result, investors could lose all or part of their investment.

Our common stock has historically been treated as a “penny stock,” which places restrictions on broker-dealers recommending the stock for purchase, and it may be treated as a “penny stock” in the future.

Our common stock has historically been defined as a “penny stock” under the Securities Exchange Act of 1934, as amended, or the Exchange Act, and its rules. The Securities and Exchange Commission, or SEC, has adopted regulations that define “penny stock” to include common stock that has a market price of less than $5.00 per share, subject to certain exceptions. These rules include the following requirements:

Additional sales practice requirements are imposed on broker-dealers who sell penny stocks to persons other than established customers and accredited investors. For these types of transactions, the broker-dealer must make a special suitability determination for the purchaser and must have received the purchaser’s written consent to the transaction prior to sale. If our common stock once again becomes subject to these penny stock rules these disclosure requirements may have the effect of reducing the level of trading activity in the secondary market for our common stock. As a result, fewer broker-dealers may be willing to make a market in our stock, which could affect a stockholder’s ability to sell their shares.

The market price of our common stock may be highly volatile, and a stockholder may not be able to resell their shares at or above the price at which the shares were purchased.

Companies trading in the stock market in general have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of these companies. Broad market and industry factors may negatively affect the market price of our common stock, regardless of our actual operating performance. The market price of our common stock may be volatile. Our stock price could be subject to wide fluctuations in response to a variety of factors, including the following:

Sales of a substantial number of shares of our common stock in the public market, or the perception that they may occur, may depress the market price of our common stock.

As of February 28, 2018, almost all of our outstanding shares were freely transferable or could be publicly resold pursuant to Rule 144 under the Securities Act of 1933, as amended, or the Securities Act. In general, under Rule 144 as currently in effect, a person (or persons whose shares are aggregated) who has beneficially owned restricted securities for at least six months, including our affiliates, would be entitled to sell such securities, subject to the availability of current public information about the company. A person who has not been our affiliate at any time during the three months preceding a sale, and who has beneficially owned his shares for at least one year, would be entitled under Rule 144 to sell such shares without regard to any limitations under Rule 144. Under Rule 144, sales by our affiliates are subject to volume limitations, manner of sale provisions and notice requirements. Any substantial sale of common stock pursuant to this prospectus, Rule 144 or otherwise may have an adverse effect on the market price of our common stock by creating an excessive supply. Likewise, the availability for sale of substantial amounts of our common stock could reduce the prevailing market price.

Our ability to use net operating losses to offset future taxable income may be subject to certain limitations.

In general, under Section 382 of the Internal Revenue Code of 1986, as amended, or the Code, a corporation that undergoes an “ownership change” is subject to limitations on its ability to utilize its pre-change net operating losses, or NOLs, to offset future taxable income. Our existing NOLs may be subject to substantial limitations arising from previous ownership changes. In addition, future changes in our stock ownership, many of which are outside of our control, could result in an ownership change under Section 382 of the Code. Our NOLs may also be impaired under state law. Accordingly, we may not be able to utilize a material portion of our NOLs. Furthermore, our ability to utilize our NOLs is conditioned upon our attaining profitability and generating U.S. federal taxable income. We have incurred net losses since our inception and anticipate that we will continue to incur significant losses for the foreseeable future; thus, we do not know whether or when we will generate the U.S. federal taxable income necessary to utilize our NOLs.

We have not paid dividends in the past and do not expect to pay dividends in the future.

We have never declared or paid cash dividends on our capital stock. We currently intend to retain all future earnings for the operation and expansion of our business and, therefore, do not anticipate declaring or paying cash dividends in the foreseeable future. The payment of dividends will be at the discretion of our Board of Directors and will depend on our results of operations, capital requirements, financial condition, prospects, contractual arrangements, any limitations on payments of dividends present in any of our future debt agreements and other factors our Board of Directors may deem relevant. If we do not pay dividends, a return on our stockholders’ investment will only occur if our stock price appreciates.

 Anti-takeover provisions in our certificate of incorporation, bylaws and Delaware law could prevent or delay a change in control.

We have 200,000,000 shares of common stock authorized. As a result, our Board will be able to issue a substantial number of additional shares of common stock, without seeking stockholder approval. In addition, provisions in our certificate of incorporation and bylaws, as well as provisions of Delaware law, may discourage, delay or prevent a merger, acquisition or change of control. These provisions could also discourage proxy contests and make it more difficult for stockholders to elect directors and take other corporate actions. These provisions:

In addition, we are subject to Section 203 of the Delaware General Corporation Law, which generally prohibits a Delaware corporation from engaging in any broad range of business combinations with any stockholder who owns, or at any time in the last three years owned, 15% or more of our outstanding voting stock, for a period of three years following the date on which the stockholder became an interested stockholder. This provision could have the effect of delaying or preventing a change of control, whether or not it is desired by or beneficial to our stockholders.

Not applicable.

We lease approximately 7,400 square feet of space in Irvine, California under a lease that expires in September 2018. Our principal executive office and our principal operations are based at this facility. We believe that our Irvine, California facility is sufficient to meet our needs for the foreseeable future.

In the ordinary course of our business, we may be subject to various claims, pending and potential legal actions for damages, investigations relating to governmental laws and regulations and other matters arising out of the normal conduct of our business. We are not aware of any material pending legal proceedings to which we are a party or of which any of our properties is the subject.

Not applicable.

PART II

Our common stock has been traded on the over-the-counter market since May 21, 2012, under the symbol “MRIC.” The following table provides the high and low bid information for our common stock during the periods indicated, giving retroactive effect to a 1:40 reverse split of our common stock effectuated in July 2016 (the “Reverse Split”). This bid information reflects inter-dealer prices, without retail mark-up, mark-down or commission and may not represent actual transactions. Prior to May 21, 2012, there was no established public trading market for our common stock.

Holders

As of February 28, 2018, we had 10,693,851 shares of common stock outstanding and no shares of preferred stock outstanding. As of February 28, 2018, we had 569 stockholders of record. In addition, as of February 28, 2018, options and warrants to purchase 10,187,277 shares of common stock were outstanding.

Dividend Policy

We have never declared or paid cash dividends on our capital stock. We currently intend to retain all future earnings for the operation and expansion of our business and, therefore, do not anticipate declaring or paying cash dividends in the foreseeable future. The payment of dividends will be at the discretion of our Board of Directors and will depend on our results of operations, capital requirements, financial condition, prospects, contractual arrangements, any limitations on payments of dividends present in any of our future debt agreements and other factors our Board of Directors may deem relevant.

Equity Compensation Plan Information

Not applicable.

The following discussion and analysis of our financial condition and results of operations should be read together with our consolidated financial statements and related notes thereto included elsewhere in this Annual Report. This discussion and analysis contains forward-looking statements that are based upon current expectations and involve risks, assumptions and uncertainties. You should review the “Risk Factors” section of this Annual Report for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements described in the following discussion and analysis.

Overview

We are a medical device company that develops and commercializes innovative platforms for performing minimally invasive surgical procedures in the brain and heart under direct, intra-procedural MRI guidance. We have two product platforms. Our ClearPoint system, which is in commercial use, is used to perform minimally invasive surgical procedures in the brain. We anticipate that our ClearTrace system, which is a product candidate, will be used to perform minimally invasive surgical procedures in the heart. In 2015, we suspended development of the ClearTrace system so that we could focus our resources on the ClearPoint system. Both systems utilize intra-procedural MRI to guide the procedures and are designed to work in a hospital’s existing MRI suite. We believe that our two product platforms, subject to appropriate regulatory clearance and approval, will deliver better patient outcomes, enhance revenue potential for both physicians and hospitals, and reduce costs to the healthcare system.

In 2010, we received regulatory clearance from the FDA to market our ClearPoint system in the U.S. for general neurological procedures. In 2011, we also obtained CE marking approval for our ClearPoint system, which enables us to sell our ClearPoint system in the European Union. Substantially all our product revenues for the years ended December 31, 2017 and 2016 relate to sales of our ClearPoint system products. We do not have regulatory clearance or approval to sell our ClearTrace system for commercial use. We have financed our operations and internal growth primarily through the sale of equity securities, the issuance of convertible and other secured notes, and license arrangements. We have incurred significant losses since our inception in 1998 as we have devoted substantial efforts to research and development. As of December 31, 2017, we had accumulated losses of approximately $101 million. We may continue to incur operating losses as we commercialize our ClearPoint system products, continue to develop our ClearTrace system, and expand our business.

Factors Which May Influence Future Results of Operations  

The following is a description of factors which may influence our future results of operations, and which we believe are important to an understanding of our business and results of operations.

Revenues

In 2010, we received 510(k) clearance from the FDA to market our ClearPoint system in the U.S. for general neurological procedures. Future revenues from sales of our ClearPoint system products are difficult to predict and may not be sufficient to offset our continuing research and development expenses and our increasing selling, general and administrative expenses. We cannot sell our ClearTrace system for commercial use until we receive regulatory clearance or approval.

Generating recurring revenues from the sale of functional neurological products is an important part of our business model for our ClearPoint system. We anticipate that, over time, recurring revenues will constitute an increasing percentage of our total revenues as we leverage installations of our ClearPoint system to generate recurring sales of our functional neurological products. Our product revenues were approximately $7.0 million and $5.6 million for the years ended December 31, 2017 and 2016 and were almost entirely related to our ClearPoint system.  

Our revenue recognition policies are more fully described in the “Critical Accounting Policies and Significant Judgments and Estimates” section below.

Cost of Revenues

Cost of revenues includes the direct costs associated with the assembly and purchase of components for functional neurological products, drug delivery and biologic products, and ClearPoint capital equipment which we have sold, and for which we have recognized the revenue in accordance with our revenue recognition policy. Cost of product revenues also includes the allocation of manufacturing overhead costs and depreciation of loaned systems installed under our ClearPoint placement program, as well as provisions for obsolete, impaired, or excess inventory.

Research and Development Costs

 Our research and development costs consist primarily of costs associated with the conceptualization, design, testing, and prototyping of our ClearPoint system products (and, prior to its suspension of development in 2015, of our ClearTrace system components). Such costs include salaries, travel, and benefits for research and development personnel, including related share-based compensation; materials and laboratory supplies in research and development activities; consultant costs; sponsored research and product development with third parties; and licensing costs related to technology not yet commercialized. We anticipate that, over time, our research and development costs may increase as we: (i) continue to develop enhancements to our ClearPoint system; (ii) resume our ClearTrace system product development efforts; and (iii) seek to expand the application of our technological platforms. From our inception through December 31, 2017, we have incurred approximately $51 million in research and development expenses.

Product development timelines, likelihood of success, and total costs can vary widely by product candidate. There are also risks inherent in the regulatory clearance and approval process. At this time, we are unable to estimate with any certainty the costs that we will incur in either the further development of our ClearTrace system for commercialization, or in our efforts to expand the application of our technological platforms.

Selling, General and Administrative Expenses

Our selling, general and administrative expenses consist primarily of salaries, incentive-based and share-based compensation, and travel and benefits; marketing costs; professional fees, including fees for attorneys and outside accountants; occupancy costs; insurance; and other general and administrative expenses, which include, but are not limited to, corporate licenses, director fees, hiring costs, taxes, postage, office supplies and meeting costs. Our selling, general and administrative expenses are expected to increase due to costs associated with the commercialization of our ClearPoint system and the increased headcount necessary to support growth in operations.

Critical Accounting Policies and Significant Judgments and Estimates

Our management’s discussion and analysis of our financial condition and results of operations are based on our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States, or GAAP. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities as of the date of the consolidated financial statements as well as the reported expenses during the reporting periods. The accounting estimates that require our most significant, difficult and subjective judgments have an impact on revenue recognition, computation of the fair value of our derivative liabilities and the determination of share-based compensation and financial instruments. We evaluate our estimates and judgments on an ongoing basis. Actual results may differ materially from these estimates under different assumptions or conditions.  

While our significant accounting policies are more fully described in Note 2 to our consolidated financial statements included elsewhere in this Annual Report, we believe that the following accounting policies and estimates are most critical to a full understanding and evaluation of our reported financial results.

Revenue Recognition. Our revenues are comprised of: (1) product revenues resulting from the sale of functional neurological products and drug delivery and biologic products; (2) product revenues resulting from the sale of ClearPoint capital equipment; and (3) revenues resulting from the rental, service, installation, training and shipping related to ClearPoint capital equipment. We recognize revenue when persuasive evidence of an arrangement exists, the selling price or fee is fixed or determinable, collection is reasonably assured, and, for product revenues, risk of loss has transferred to the customer. For all sales, we require either a purchase agreement or a purchase order as evidence of an arrangement. We analyze revenue recognition on an individual agreement basis. We determine if the deliverables under the arrangement represent separate units of accounting as defined by GAAP. Application of GAAP regarding multiple-element arrangements requires us to make subjective judgments about the values of the individual elements and whether delivered elements are separable from the other aspects of the contractual relationship.

Inventory. Inventory is carried at the lower of cost (first-in, first-out method) or net realizable value. All items included in inventory relate to our functional neurological products, drug delivery and biologic products, and ClearPoint capital equipment. Software license inventory that is not expected to be utilized within the next twelve months is classified as a non-current asset. We periodically review our inventory for obsolete items and provide a reserve upon identification of potentially obsolete items.

Derivative Liabilities. Our derivative liabilities arise from: (a) a conversion feature related to the Brainlab Note; and (b) warrants issued in connection with certain private placements of shares our common stock. The fair values of the conversion feature and the warrants are presented as liabilities based on the terms of the conversion feature that allow for potential conversion at a price that may be less than market value on the date of conversion, and the terms of the warrants that bear certain net cash settlement and exercise price reset, or “down round,” provisions. These derivative liabilities, which are recorded on our consolidated balance sheets, are calculated utilizing the Monte Carlo simulation valuation method. Changes in the fair values of these warrants are recognized as other income or expense in the related statement of operations.

Share-Based Compensation. We account for compensation for all arrangements under which employees and others receive shares of stock or other equity instruments (including options and warrants) based on fair value. The fair value of each award is estimated as of the grant date and amortized as compensation expense over the requisite vesting period. The fair values of our share-based awards are estimated on the grant dates using the Black-Scholes valuation model. This valuation model requires the input of highly subjective assumptions, including the expected stock volatility, estimated award terms and risk-free interest rates for the expected terms. To estimate the expected terms, we utilize the “simplified” method for “plain vanilla” options discussed in the SEC’s Staff Accounting Bulletin 107, or SAB 107. We believe that all factors listed within SAB 107 as prerequisites for utilizing the simplified method apply to us and to our share-based compensation arrangements. We intend to utilize the simplified method for the foreseeable future until more detailed information about exercise behavior becomes available. We based our estimate of expected volatility on the average of historical volatilities of publicly traded companies we deemed similar to us because we lack our own relevant historical volatility data. We will consistently apply this methodology until we have sufficient historical information regarding the volatility of our own share prices to use as the input for all of our share-based fair value calculations. We utilize risk-free interest rates based on a zero-coupon U.S. treasury instrument, the term of which is consistent with the expected term of the share-based award. We have not paid, and do not anticipate paying, cash dividends on shares of our common stock; therefore, the expected dividend yield is assumed to be zero.

Research and Development Costs. Costs related to research, design and development of products are charged to research and development expense as incurred. These costs include direct salary and employee benefit-related costs for research and development personnel, costs incurred under the terms of collaborative agreements, costs for materials used in research and development activities, and costs for outside services.

Results of Operations

Comparison of the Year Ended December 31, 2017 to the Year Ended December 31, 2016

 NM= not meaningful

Revenue. Total revenues were $7.4 million for the year ended December 31, 2017, and $5.7 million for the year ended December 31, 2016, an increase of $1.6 million, or 28%.

Functional neurology revenue, which consists of disposable product commercial sales related to cases utilizing the ClearPoint system, increased 34% to $5.3 million from $4.0 million in 2016. This increase was due primarily to the utilization of the ClearPoint system in 629 cases during 2017, an increase of 25% from 504 cases in 2016. There were no increases in functional neurology product prices during 2017 that would be reasonably expected to affect a typical customer order.

Biologics and drug delivery systems revenue, which consists primarily of disposable product sales related to customer-sponsored clinical trials utilizing the ClearPoint system, were $563,000, as compared with $771,000 in 2016. This fluctuation arose from $222,000 in purchases of such products by Voyager in late 2016, which have been subsequently used in Voyager’s clinical trials. Biologics and drug delivery product price increases were implemented in 2017, but such increases did not extend to the entire biologics and drug delivery product line and averaged less than 1% for a typical customer order.

Capital equipment revenue, consisting of sales, rentals and service of ClearPoint reusable hardware and software, increased 50%, to $1.5 million, from $980,000 in 2016. This increase was due primarily to increases from 2016 to 2017 of : (a) $284,000 of equipment sales due to the sale of a greater number of ClearPoint systems in 2017, relative to 2016; (b) $131,000 of equipment rental revenue arising from agreements with terms of less than one year to two customers in 2017 (there was no equipment rental revenue in 2016); and (c) $49,000 related to equipment service contracts due to an increase in the number of such contracts in 2017, relative to 2016. Capital equipment price increases were implemented in 2017, but such increases did not extend to the entire capital equipment product line and averaged approximately 3% for a typical customer order for either new equipment or a new service contract.

Cost of Revenue. Cost of revenue was $2.9 million for the year ended December 31, 2017, representing gross margin of 61%, compared to $2.6 million for the same period in 2016, representing gross margin of 54%. The increase in gross margin was due primarily to: (a) a larger portion of capital equipment service and rental revenues, which bear higher margins relative to product sales, in relationship to total revenues in 2017, relative to 2016; (b) lower costs for scrap, expired product and reserves for inventory obsolescence during 2017, relative to 2016; and (c) a favorable mix of functional neurology and capital equipment products sold in 2017, relative to 2016.

Research and Development Costs. Research and development costs were $2.8 million for year ended December 31, 2017, compared to $2.6 million for the same period in 2016, an increase of $186,000, or 7%. The increase was due primarily to: (a) payments aggregating $661,000, the majority of which was in the form of shares of our common stock, required under certain license and product co-development agreements entered into in April 2017; and (b) an increase of $87,000 in regulatory legal fees related to increased filing activity in 2017, relative to 2016, that were partially offset by: (c) an aggregate decrease of $373,000 in software development and intellectual property-related costs; and (c) a decrease of $168,000 in personnel costs related to a lower headcount during 2017, relative to 2016.

Sales and Marketing Expenses. Sales and marketing expenses were $4.0 million for the year ended December 31, 2017, compared to $3.8 million for the same period in 2016, an increase of $179,000, or 5%. This increase was primarily due to an increase of $143,000 in personnel-related expenses due to increased headcount during 2017, relative to 2016.

General and Administrative Expenses. General and administrative expenses were $4.0 million for the year ended December 31, 2017, compared to $4.2 million for the same period in 2016, a decrease of $144,000, or 3%. The decrease was due primarily to: (a) a decrease of $629,000 in professional fees, primarily related to financing activities undertaken in 2016 that did not recur during 2017; and (b) a decrease of $246,000 in stock-based compensation, due to the suspension during 2017 of stock-based grants pending stockholder approval of the Second Amended and Restated Incentive Compensation Plan in October 2017. These decreases were partially offset by: (a) an increase of $235,000 in recruiting and hiring costs related to the November 2017 change in our Chief Executive Officer; (b) an increase of $167,000 in general corporate legal fees; (c) an increase of $49,000 in investor relations costs; (d) an increase of $32,000 in insurance premiums.

Other Income (Expense). During the years ended December 31, 2017 and 2016, we recorded gains of $25,000 and $1.1 million, respectively, resulting from changes in the fair value of our derivative liabilities. Such derivative liabilities related to: (a) warrants issued with either or both net-cash settlement and down-round price protection provisions in connection with 2012 and 2013 private placement transactions; (b) the June 2016 Amendment of the New Brainlab Note as discussed in Note 5 to the Consolidated Financial Statements included elsewhere in the Annual Report and as discussed below; and (c) the August 2016 Amendments, entered into with the 2014 Convertible Note Holders, as discussed in Note 5 to the Consolidated Financial Statements included elsewhere in the Annual Report and as discussed below.

In April 2016, we entered into the 2016 Purchase Agreement with Brainlab under which the Brainlab Note was restructured and reissued as the New Brainlab Note. As a result, we recorded a debt restructuring gain of $941,000.

In June 2016, we entered into the June 2016 Amendments with Brainlab, with respect to the New Brainlab Note, and with the 2014 Convertible Note Holders. Based on the provisions of the June 2016 Amendments, on June 30, 2016, we recorded a debt restructuring loss of $820,000 resulting from the restructuring of the New Brainlab Note and those 2014 Secured Notes subject to the June 2016 Amendments.

In August 2016, we entered into the August 2016 Amendments with the 2014 Convertible Note Holders. Based on the provisions of the August 2016 Amendments, on August 30, 2016 we recorded a debt restructuring loss of approximately $933,000, representing the aggregate difference in the fair value of the derivative liabilities created by the June 2016 Amendments between the points in time (i) immediately preceding, and (ii) immediately subsequent to, the execution of the August 2016 Amendments.

During the year ended December 31, 2017, we recorded other income of $17,000, as compared with other income of $216,000 recorded during the same period in 2016, representing a decrease of $199,000, or 92%. This decrease was due primarily to grant income from a U.S. federal agency of $203,000 earned from a project in process during the 2016, which was discontinued by the agency later in 2016. We have not since undertaken any additional such projects.

Net interest expense for the year ended December 31, 2017 was $873,000, compared with $1.1 million for the same period in 2016. The decrease was due primarily to the conversion of an aggregate $1.74 million in principal balance of the 2014 Secured Convertible Notes held by the 2014 Convertible Note Holders in connection with the 2016 PIPE and pursuant to the terms of the August 2016 Amendments, as discussed in Note 5 to the Consolidated Financial Statements included elsewhere in this Annual Report.

Liquidity and Capital Resources

At December 31, 2017, we had cash and cash equivalent balances aggregating $9.3 million, resulting primarily from completion of the 2017 PIPE discussed in Note 6 to the Consolidated Financial Statements included elsewhere in this Annual Report. Net cash used in operating activities was $6.0 million and $5.8 million for the years ended December 31, 2017 and 2016, respectively.

Our plans for the next twelve months reflect management’s anticipation of increases in revenues from sales of the ClearPoint system and related disposable products resulting from greater utilization at existing installed sites and the installation of the ClearPoint system at new sites. Management also anticipates increases over the next twelve months in operating expenses to support the expected increase in revenues, with resulting decreases in loss from operations and in cash flow used in operations. There is no assurance, however, that we will be able to achieve our anticipated results, and even in the event such results are achieved, we expect to continue to consume cash in our operations over at least the next twelve months.

As a result of the foregoing, we believe we will have sufficient cash resources to support our operations for at least the next twelve months.

Cash Flows

Cash activity for the years ended December 31, 2017 and 2016 is summarized as follows:

Net Cash Flows from Operating Activities. We used $6.0 million and $5.8 million of cash for operating activities in 2017 and 2016, respectively.

In 2017, uses of cash in operating activities consisted of: (i) our $7.2 million loss; (ii) increases in accounts receivable of $83,000, inventory of $470,000, prepaid expenses and other current assets of $58,000, and other assets of $1,000; and (iii) a decrease in accounts payable and accrued expenses of $512,000. These uses were partially offset by: (a) an increase in deferred revenue of $33,000; and (b) non-cash expenses included in our net loss aggregating $2.3 million and consisting of depreciation and amortization, share-based compensation, expenses paid through the issuance of common stock, and amortization of debt issuance costs and original issue discounts, partially offset by a $24,000 decrease in the fair value of our derivative liabilities.

In 2016, uses of cash in operating activities primarily consisted of: (i) our $8.1 million loss; and (ii) a $38,000 increase in prepaid expenses and other current assets. These uses were partially offset by: (a) decreases in accounts receivable of $352,000 and in inventory of $72,000; (b) increases in accounts payable and accrued expenses of $178,000, and in deferred revenue of $107,000; (c) non-cash expenses included in our net loss aggregating $2.6 million and consisting of depreciation and amortization, share-based compensation, expenses paid through the issuance of common stock, loss on debt restructuring, loss on retirement of equipment, and amortization of debt issuance costs and original issue discounts, partially offset by a $1.1 million decrease in the fair value of our derivative liabilities.

Net Cash Flows from Investing Activities. Net cash flows used in investing activities in 2017 and 2016 were $27,000 and $101,000, respectively, and consisted primarily of equipment purchases.

Net Cash Flows from Financing Activities. Net cash provided by financing activities in 2017 of $12.0 million reflected primarily net proceeds received from the 2017 PIPE. Net cash provided by financing activities in 2016 of $3.8 million reflected primarily net proceeds received from the 2016 PIPE.

Off-balance Sheet Arrangements

We are not a party to any off-balance sheet arrangements that have, or are reasonably likely to have, a material current or future effect on our financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.

Operating Capital and Capital Expenditure Requirements

To date, we have not achieved profitability. We could continue to incur net losses as we continue our efforts to expand the commercialization of our ClearPoint system products, develop our ClearTrace system, and pursue additional applications for our technology platforms. Our cash balances are typically held in a variety of demand accounts with a view to liquidity and capital preservation.

Because of the numerous risks and uncertainties associated with the development and commercialization of medical devices, we are unable to estimate the exact amounts of capital outlays and operating expenditures necessary to successfully commercialize our ClearPoint system products, complete the development of our ClearTrace system and pursue additional applications for our technology platforms. Our future capital requirements will depend on many factors, including, but not limited to, the following:

Not applicable.

The Report of Independent Registered Public Accounting Firm and Financial Statements are set forth on pages [●] to [●] of this Annual Report.

None.

Management’s Evaluation of Disclosure Controls and Procedures

We have established disclosure controls and procedures, as such term is defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, or the Exchange Act. Our disclosure controls and procedures are designed to ensure that material information relating to us is made known to our principal executive officer and principal financial officer by others within our organization. Under their supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our disclosure controls and procedures as of December 31, 2017, to ensure that the information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is accumulated and communicated to our management, including our principal executive officer and principal financial officer as appropriate, to allow timely decisions regarding required disclosure. Based on this evaluation, our principal executive officer and principal financial officer concluded that our disclosure controls and procedures were effective as of December 31, 2017.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rule 13a-15(f) under the Exchange Act. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with United States generally accepted accounting principles. Any system of internal control, no matter how well designed, has inherent limitations, including the possibility that a control can be circumvented or overridden and misstatements due to error or fraud may occur and not be detected. Also, because of changes in conditions, internal control effectiveness may vary over time. Accordingly, even an effective system of internal control will provide only reasonable assurance that the objectives of the internal control system are met.

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2017, based on the criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on this evaluation, our management concluded that our internal control over financial reporting was effective as of December 31, 2017.

This Annual Report does not include an attestation report of our independent registered public accounting firm regarding internal control over financial reporting. Management’s assessment was not subject to attestation by our independent registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit us to provide only management’s assessment in this Annual Report.

Changes in Internal Control over Financial Reporting

During the year ended December 31, 2017, there were no changes in our internal control over financial reporting that materially affected, or that are reasonably likely to materially affect, our internal control over financial reporting.

None.

PART III

The information required by this item is incorporated by reference from the definitive proxy statement to be filed within 120 days after December 31, 2017, pursuant to Regulation 14A under the Exchange Act in connection with our 2018 annual meeting of stockholders. 

Our Board of Directors has adopted a Code of Business Conduct and Ethics. The Code of Business Conduct and Ethics applies to all of our employees, officers (including our principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions), agents and representatives, including directors and consultants. The Code of Business Conduct and Ethics is posted on our website at www.mriinterventions.com. We will provide a copy of this document to any person, without charge, upon request, by writing to our Investor Relations Department, 5 Musick, Irvine, CA 92618. We intend to satisfy the disclosure requirement under Item 5.05 of Form 8-K regarding an amendment to, or waiver from, a provision of our Code of Business Conduct and Ethics, or waivers of such provisions, applicable to any principal executive officer, principal financial officer, principal accounting officer or controller, persons performing similar functions or our directors on our website identified above. The inclusion of our website address in this Annual Report does not include or incorporate by reference the information on our website into this Annual Report.

The information required by this item is incorporated by reference from the definitive proxy statement to be filed within 120 days after December 31, 2017, pursuant to Regulation 14A under the Exchange Act in connection with our 2018 annual meeting of stockholders.

The information required by this item is incorporated by reference from the definitive proxy statement to be filed within 120 days after December 31, 2017, pursuant to Regulation 14A under the Exchange Act in connection with our 2018 annual meeting of stockholders.

The information required by this item is incorporated by reference from the definitive proxy statement to be filed within 120 days after December 31, 2017, pursuant to Regulation 14A under the Exchange Act in connection with our 2018 annual meeting of stockholders.

The information required by this item is incorporated by reference from the definitive proxy statement to be filed within 120 days after December 31, 2017, pursuant to Regulation 14A under the Exchange Act in connection with our 2018 annual meeting of stockholders.

PART IV

(a)(1) The following documents are filed under “Item 8. Financial Statements and Supplementary Data,” pages [●] through [●], and are included as part of this Annual Report:

(a)(2) Financial statement schedules are omitted as they are not applicable.

(a)(3) See Item 15(b) below.

(b) Exhibits